Buscar Productos

tna thermo-wash® HW 3
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Fiery Fries - Masala Coated Fries
Fiery Fries - Masala Coated Fries
Fries may be western, but IBF revamps them with secret spices from a mother's kitchen, to present to you, their very Indian, masaaledar, "Fiery Fries". Enjoy their crunchy and mealy fries with a unique
Allround Potato Processing Line 450 series
Potato Processing Line 450 series
Potato Processing line with a washing area, polisher, shake grader. The washing area contains ​a Destoner when there is a lot of dirt coming along with the produce, destoners are the ideal machines.
Flo-Mech Flo-Flavour™ Plus
Flo-Flavour™ Plus
The Flo-Flavour™ plus systems have been designed to apply powder and oil (if required) separately to products that do not need a slurry based flavour that soaks in. The systems are used for other snacks products like fried snacks.
tna hydro-clear® OWB 3
hydro-clear® OWB 3
Florigo hydro-clear® OWB 3 is a solution for stripping water from both the top and bottom of potato slices before frying.
Urschel - Comitrol® Processor Models 3600F - 3640F
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
tna conti-pro® PC 3
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
Flo-Mech Slicer Module
Slicer Module
Flo-Mech complete module for slicing of product on stainless steel platforms with flumes, integrated equipment, steel work, decking, stairs, handrail kick strips.
Flo-Mech Flo-Dry® Dryer
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
The Intralox Belt Puller enables simpler, faster and safer belt handling.
FoodSafe Modular Plastic Belting (MPB) Portfolio
The Intralox FoodSafe Modular Plastic Belting Portfolio is the only solution that addresses the root causes of food conveyor challenges. Maintaining conveyance systems in food processing is challenging.
tna hydro-wash® SW 3
hydro-wash® SW 3
Florigo hydro-wash® SW 3 is a slice washing system that removes starch and collects full size potato slices in a single layer for even frying.
Allround Potato Skin Separator SDK 100
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out

You May Also Like

Allround Fans
Fans
Fans are an integral part of the storage system, and therefore it is very important the proper type of fans are chosen for the right application. Furthermore, fans should be reliable and able to work under difficult
Tummers Aligner
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
Allstore
Allstore
Allstore is regulating the temperature, relative humidity, and CO₂ level inside the storage building to the optimal values to maintain the product quality with minimal storage losses.
tna conti-pro® PEL 3
conti-pro® PEL 3
Florigo conti-pro® PEL 3 is a pellet and specialty products frying system handling a wide range of pellet shapes and product shapes using a highly efficient frying process.
Potato Processing Equipment Specialist Kiremko presents the H Flow Conyevor, especially developed for the transportation of snacks and frozen products.
H-Flow Conveyor®
The H-Flow Conveyor® guarantees less product breakage and loss of coating and flavouring, compared to vibratory transfer systems.
The Pulsemaster Membrana makes it possible to measure the effect of a PEF treatment on the product properties (conductivity)
Membrana
PEF specialist Pulsemaster offers a conductivity measurement device to both the food and beverage industry, as well as the scientific sector. This unit is instrumental in the quantification of a pulsed electric field treatment on e.g. potato tissue.

Filtros

Refine By Company
Selected Entities
Refinar por Grupo de Productos
Filtrar Alfabéticamente