Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.
Corda Invicta
With 30% less oil content, a 15% smaller factory footprint, a number of high-tech innovations and a lower Total Cost of Ownership than your current fryer, the Kiremko CORDA Invicta is leaps ahead in frying.
FLO-STARCH® Starch and Water Recovery System
FLO-STARCH® Starch and Water Recovery System separates starch from process water and deposits the starch in large bags for re-sale or re-use.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Space Finder
The Allround Space Finder is designed in such a way that bulk stores are filled in the most effective manner. The Space Finder makes sure every inch of the storage facility is used.
Freeze Dryer
NSSPL Freeze Dryers are designed with the latest technologies and high-quality equipment that ensures its performance with consistency. It ensures the aroma and taste of the foods
Table Potato Washing and Grading line
Potato Processing line with a washing area, shake grader. The washing area contains a Destoner when there is a lot of dirt coming along with the produce, destoners are the ideal machines.
Rinsing / Starch Washing Systems
Flo-Mech Rinsing / Washing systems design for removing surface starch. Flo-Mech offer a range of solutions to remove surface starch from peeled / cut potatoes before the next stag of the process.
Fryer for Batter-coated French Fries
Over 16,000 kg/h of finished crispy batter-coated french fries can be produced for fast-food lovers using Heat and Control's latest batter applicator and multi-zone fryer system.
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
Potato washing, brushing and grading line
Potato Processing line with a washing area, brushing area, and grading area.
Heracles Flavour Liquids and Solids system
Heracles is a robust and high capacity equipment, designed for high productions or for products that are difficult to aromatize.
You May Also Like
FastBack® 260E G3
The new FastBack P2 400E horizontal motion conveyor is the sanitary solution for high-volume transfer and distribution.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
quik-coat® MD 5
tna quik-coat® MD 5 is the ultimate mandrel dispensing unit that applies a variety of free flowing ingredients consistently onto the top of products passing underneath. The tna quik-coat® MD 5 is custom configured for width and ingredients.
Mud Pump
SFW Mud Pump is a severe-duty 'mud' pump for dirty abrasive water.
Drop Limit Box Tipper
The Drop limit box tipper is a box tipper where the drop is limited, which leads to less damage to the product. The tilting of the box is done in three steps: The cubic box is put into the machine, after which the crate is clamped against a cover plate.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.