Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
M VersaPro® Dicer
The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower.
Model CC Turntable
The Model CC turntable assists with head maintenance. Now available, the new Model CC turntable assists processors with a variety of tasks to save time and effort.
TranSlicer® 2510 Cutter
The TranSlicer 2510 Cutter accepts compressible food products up to 8" (203 mm) in diameter, or firm products up to 6-3/4" (171 mm) in diameter — precutting may be necessary. Optional static hold-down assembly is available to maintain positive feeding assistance.
Comitrol® Processor Model 2100
This machine is used for reducing into flakes or granulation for further processing.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
Model VSC Segment Cutter
The Model VSC produces a wide range of segments, slabs, or rectangular strips. Several different cutting set-ups are available including standard heads, Flo-Cut® Model 360 heads, and Velocicut® heads. Consult your local Urschel sales representative for the cutting head best-suited for our application.
Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
E TranSlicer® Cutters
The standard E TranSlicer Cutter (ETRS) accepts firm products up to 4" (101.6 mm) in diameter or leafy-type, compressible products up to 6" (152.4 mm). Interchangeable 20" (508 mm) diameter stainless steel cutting wheels reduce products with great precision and efficiency at high capacity.
You May Also Like
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
Micro Adjustable Shape Cuts SL14
The Urschel MicroAdjustable® Slicing Head (SL-14) offers maximum cutting action and expedient knife changeovers for your potato chips production line.
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
Grader-Halver
A cost-effective solution designed to consistently grade potatoes according to size then halve any that are larger than the predetermined size.
Sprint 2® Dicers
Sprint 2® Potato Dicer - 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.
Flo-Cut® Model 360 Watergun Cutting Head
The Flo-Cut® Model 360 cutting head is designed for use in large volume watergun systems, or with the Urschel Model VSC Cutter. This unit can be integrated into watergun systems and offers fast, easy cutting head replacement for changing knives or sizes of cuts.
