thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
robag® 3e FX series
tna robag® FX series is a vertical, form, fill and seal (VFFS) packaging solution with speeds up to 250 bags per minute using rotary triple, double, single or flat jaw configurations to package a variety of bag types.
Horizontal Box Filler
Allround Horizontal Box Filler is designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the product damage is reduced as much as possible and to fill the box completely from sides as well.
ultra-clean® COMBO 3
Florigo ultra-clean® COMBO 3 is a 3-in-1 cleaning solution for de-soiling, de-stoning and washing root vegetables, including potatoes.
Hoppers
Allround hoppers are designed to feed machines or product lines or act as a buffer in a processing line. The hopper is designed to work with cubic boxes and big bags.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Ishida ACP-700 Automated Snack Food Case Packer
The ACP-700 Case Packer can pack small and large pillow style bags, standup major, standup minor, side pack, as well as multiple pack patterns within the case.
Mud Pump
SFW Mud Pump is a severe-duty 'mud' pump for dirty abrasive water.
STRATA Invicta®
The STRATA Invicta® sets the new standard in steam peeling systems, offering the highest yield at the shortest possible cycle times.
Hydro-cutting lines
Tummers Food Processing Solutions is the biggest player in hydro cutting technology in Europe. An extensive range of typical Tummers Food Processing Solutions standard equipment is available, while layout and details are custom designed.
Flo-Therm® G4 SX Oil Heater
Flo-Mech Flo-Therm® G4 SX Oil Heater is a Direct Oil Heating Systems with Pollution Control
FastBack® Left Right Center (LRC) Diverting Weigher Infeed Solution
The FastBack Left Right Center (LRC) is a compact double multihead weigher feed solution designed to provide a precise, consistent product stream to Ishida's patented back-to-back 218 twin weigher.
Reverse box tipper
When an empty box is put in its place box will tip at an angle. While the box is filled he slowly tips back. This way of filling minimizes the product damage.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Box Unstacker
Allround box unstacker is designed to speed up the process of unstacking and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.
Box tipper
Box tippers are designed to feed processing lines or machines. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
Comitrol® Processor Model 2100
This machine is used for reducing into flakes or granulation for further processing.