Affinity® CD-L Dicer
The new Affinity® CD-L Dicer produces uniform dices in the small to intermediate size range. The CD-L combines the utility of Urschel Models CD-A and L-A, plus working design elements from the Affinity Integra® Dicer.
Model CC Slicer
Food processors rely on the Urschel Model CC (MCC) to produce precise, uniform slices, strips cuts, shreds, and granules at high production capabilities with excellent results.
Buffer
Buffers allow to absorb the excess product flow and to dose it back to the line according to the
needs.
needs.
Space Finder
The Allround Space Finder is designed in such a way that bulk stores are filled in the most effective manner. The Space Finder makes sure every inch of the storage facility is used.
Air dryer
The Allround Air dryer is designed to use a high-powered fan to remove water from the product. With the web belt, the water goes through the web and can be collected in a gutter or bin.
VFFS rotary polyethylene packaging system robag® FXIS
tna robag® FXIS is a solution for packaging applications such as fresh produce and confectionery using polyethylene (PE) film.
E²E-Condenser
Steam peeling is the most efficient way to peel potatoes, but the emission causes a loss of energy. The E²E-Condenser saves energy by condensing the emission and using the water for other purposes that take place further in the process.
tna conti-pro® DAL 3
Florigo conti-pro® DAL 3 is a continuous dal frying system that features a product transport system that increases product quality while reducing product loss.
Flo-Therm® G4 SX Oil Heater
Flo-Mech Flo-Therm® G4 SX Oil Heater is a Direct Oil Heating Systems with Pollution Control
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
hydro-wash® SW 3
Florigo hydro-wash® SW 3 is a slice washing system that removes starch and collects full size potato slices in a single layer for even frying.
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
Pulsemaster Compact PEF system
Pulsemaster Compact PEF system is a robust, all-in-one unit with a small footprint, which is designed to suit small and mid-scale production lines. The Compact PEF system is easy to install in a production line, quick to start up and has low energy and water requirements. This Compact PEF system can process up to an impressive 10 tons per hour at PEF.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
hydro-wash® WTP 3
Florigo hydro-wash® WTP 3 is a slice washing system that removes starch and collects only full size potato slices.
E²E SteamClosure
The introduction of the E2E SteamClosure means those days are over. In conjunction with partner Solutherm, Tummers is continuing to expand the Emission to Energy (E2E) concept through the addition of this ingenious extraction system.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.