Расширенный поиск

Vanmark Water Reclamation System

The Water Reclamation System recirculates process water from Vanmark’s abrasive peelers – reducing water usage up to 90%.

The skid-mounted system removes peel waste from process water, collecting it to be sold, and recirculates filtered water back into the peeler in a closed loop.

It can integrate with and support up to three machines, with each now operating on less than 1.5 GPM (5.7 l/min) of fresh water input.

  • Clean and recirculate peeler water in closed loop to reduce usage up to 90%
  • Integrate with and support up to three Peeler/ Scrubber/Washer machines
  • Skid-mounted for easy installation and start-up
  • Flow managed through meters at each machine and progressive overflow design for self-balance
  • Sanitary design allows for quick and thorough cleaning
Main Filter Screen: 48” (1219 mm) diameter x 106 micron

Motor: 15 amps, 460 VAC, 3 phase

Weight: 2000 lbs. (900 kg)

Solids: Collects approximately 1.5% of total product flow rate

  • Spray bar conversion assemblies
  • Secondary waste separating auger
  • Automated flush and restart modes
  • Fresh water flow meter
  • NEMA 4X SS enclosure
  • Integrated control panel
  • Lift pump for peelers with drain port lower than 56” (1422 mm)
Kiremko Food Processing Equipment
Key Technology
Tummers Food Processing Solutions
Heat and Control
PIP Innovations
Urschel Laboratories, Inc.
TNA Australia Pty Ltd
Rosenqvists Food Technologies
Natural Storage Solutions Pvt. Ltd
ZEISS Spectroscopy
Herbert B.V.
Tek-Dry Systems Ltd.
Buhler Aeroglide
Flo-Mech Ltd.
Iscon Balaji Foods
Allround Group
Idaho Steel Products
Insort GmbH
Dutch Tec Source BV (DTS)
Vanmark Equipment LLC
FPS Food Process Solutions
Wyma Engineering (NZ)
NDC Technologies
Potatoes New Brunswick
Charlottetown Metal Products.
SiccaDania A/S
Southern Fabrication Works
Scott Automation NV
Siddharth Starch