Drop Limit Box Tipper
The Drop limit box tipper is a box tipper where the drop is limited, which leads to less damage to the product. The tilting of the box is done in three steps: The cubic box is put into the machine, after which the crate is clamped against a cover plate.
quik-coat® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
Potato Washing, Brushing & Grading line
Potato Processing line with washing, brushing, and grading. First, there is receiving and brushing area. Product pass from swan neck elevator and move from spiral roller set and brusher to reach the inspection and grading area.
Grader-Halver
A cost-effective solution designed to consistently grade potatoes according to size then halve any that are larger than the predetermined size.
Box tipper
Box tippers are designed to feed processing lines or machines. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
Receiving Hopper
The Allround Receiving Hopper is designed to feed or act as a buffer in loading and unloading lines or processing lines. The hopper is designed in such a way that it can be fed by tip trailers, box tippers, and big bags.
Web grading line SS 90 series
Web grading line SS 90 series hand feed inspection on outlet belt
Unitized Vacuum Fryer
Versatile vacuum frying made simple. Self-contained vacuum fryer saves space & controls acrylamide.
Horizontal Box Filler
Allround Horizontal Box Filler is designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the product damage is reduced as much as possible and to fill the box completely from sides as well.
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
11 mm Skin on French Fries
With the skin left on for extra flavour and rustic appeal, these frites are made from uber long, high quality potatoes. Potato skin is not only a rich source of fibre
conti-cut hydro cutting system
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
You May Also Like
Flo-Filter® Stack
The action continues under the fryer hood as the slices move down inside the fryer. In most systems in Europe the oil is heated by an incinerator (such as the Flo-Therm™ heater).
Transport Belts
The Allround transport belts are designed to transport produce over long distances. There are several variations of belts. Each variation is intended for a different purpose.
Field Potato Sorter (FPS)
The FPS, Field Potato sorter, is a sensor based food sorter for unwashed potatoes, removing soil clods, stones and foreign material. It is a high volume, high capacity, robust machine for growers and packers that is built to last.
hydro-wash® WTP 3
Florigo hydro-wash® WTP 3 is a slice washing system that removes starch and collects only full size potato slices.
Drum Dryer
Tummers is world market leader in potato flake lines. In a flakes line, the Drum Dryer dries the potato mash. A thin, perfectly distributed layer of mash is deposited onto the heated cylinder which evaporates excess moisture and creates a sheet of dried potato.
Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.