Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
intelli-spin® 100 series
Arcall intelli-spin® 100 series is a cantilever spray system that uses spinning disc technology to provide accurate and consistent liquid and slurry application.
Zephyr Horizontal Motion Conveyor
Zephyr™ provides gentle, high-capacity and low maintenance conveying for processors of frozen, fragile, seasoned, breaded or coated products.
Mobile washer PD 500
Allround Mobile washer PD 500 washing machine is designed for cleaning produce. After the produce falls into the water it floats to a rotating drum. While the produce floats, stones and dirt sink to a waste belt at the back of the machine.
Fans
Fans are an integral part of the storage system, and therefore it is very important the proper type of fans are chosen for the right application. Furthermore, fans should be reliable and able to work under difficult
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Corona® extreme
Corona® extreme from ZEISS is the most robust spectrometer on the market. It doesn’t matter if it’s extremely hot, cold, or there are high levels of shock, vibration, dust or debris, Corona® extreme provides full-scale spectrometer measurement
Flo-Filter® Oil
Flo-Mech Flo-Filter® Oil: Continuous Frying Oil Filtration (& Management)
remote assist
the tna remote assist digital support service enables immediate access to tna’s global expertise. Powered by the Microsoft HoloLens 2, tna remote assist allows users to connect directly with technicians, share what they see in real-time and receive precise instructions.
Transport Belts
The Allround transport belts are designed to transport produce over long distances. There are several variations of belts. Each variation is intended for a different purpose.
Hermes Flavour Liquids and Solids system
Hermes is a piece of equipment designed for large-scale production due to its robustness and size allows to apply powdered liquids, flavors and salt simultaneously.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
You May Also Like
Fresh Mash Line
Idaho Steel is active worldwide in designing, producing and installing complete processing lines, factory upgrades and individual machines for potato specialties.
Cutting line Switcher
Tummers Cutting line Switcher is a stainless steel, industrial switcher for changing cutting blocks either automatically or manually, and without interrupting your production. They can be Operated with a front-mounted touch screen.
intelli-flav® OMS 5.1
The tna intelli-flav® OMS 5.1 is a next-generation on-machine seasoning (OMS) system that provides both powder flavouring and liquid oil in a single drum, to deliver consistent coverage and flavour to a variety of products.
wet washdown VFFS system arctic® 3
A vertical form, fill and seal (VFFS) food packaging solution, the tna arctic®3 is constructed from anti-corrosive stainless steel, handles wet washdown cleaning and meets strict sanitary requirements.
M VersaPro® Dicer
The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower.
Drop Limit Box Tipper
The Drop limit box tipper is a box tipper where the drop is limited, which leads to less damage to the product. The tilting of the box is done in three steps: The cubic box is put into the machine, after which the crate is clamped against a cover plate.
