Heat and Control is showcasing all things coating and conveying at Gulfood Manufacturing

Gulfood Manufacturing 2017 is on again in Dubai from the 31st October and Heat and Control will once again be there, showcasing all things Coating and Conveying. 

 

Heat and Control FastBack 260E G3 Cartridge System

At this year’s show, Heat and Control will focus on Coating and Conveying with the launch of its FastBack 260E G3 Cartridge System and the integrated Spray Dynamics ‘Slurry On Demand’ Continuous Mixing System and WeighBack® for the Middle East Region. 

 

Spray Dynamics ‘Slurry On Demand’ Continuous Mixing System

Spray Dynamics equipment on display at Gulfood Manufacturing 2017

The Spray Dynamics have undergone a change with a new look team and new look, with product development high on the agenda for 2017/18, with their new facilities in Missouri, USA opening by the end of the year. This facility will offer the latest in manufacturing capability, modern office and engineering space, and product testing space.

HeatWave® fryer by Heat and Control via Augmented Reality. 

To further enhance these actual equipment systems, you will be able to experience a working HeatWave® fryer by Heat and Control via Augmented Reality.

 

Try the Heat and Control AR app. You can try it at home as well! Download and print this page, put it on your desk, open the AR app and aim your phone at the printed page.

Experience how Heat and Control’s unique HeatWave Fryer operates by visualising animated 3D models of the equipment via the Heat and Control Augmented Reality (AR) app.

The Heat and Control app uses a drawing of the HeatWave Fryer that acts as a trigger point to view the animation. All you need to do is download the Heat and Control AR app and point your device at this image of the HeatWave Fryer and a 3D model of the fryer appears. You can see how the HeatWave Fryer cooks product from 360 degrees as you move around the image, allowing you to see all sides and angles of the fryer.

The Heat and Control AR app allows the user to open and close the fryer by tapping on the screen prompts, and be able to run product through the fryer. This will involve an animation of food product (nuts) moving along the conveyor belt and oil flowing in curtains over the product.



 

Heat and Control Heatwave Fryer

The development of the app will allow Heat and Control to interact with their customers on a new and exciting level, by providing technology that will give food manufacturers a different avenue to view and experience equipment in an animated 3D environment.

Heat and Control Sales Manager, Bobby Kane: 

 

“Given the size and sophisticated nature of a lot of our equipment, like the HeatWave Fryer, it can be a logistical nightmare to have large pieces of equipment of tradeshow booths for our customers to see.”

“The Heat and Control AR app now allows customers to accurately view and see how equipment such as the HeatWave Fryer operates, simply by using their phone or any mobile device anywhere in the world.”

The HeatWave snack frying system efficiently fry nuts, pellets, Namkeen and other snacks using less oil than conventional fryers by a proven breakthrough design that cooks snacks using curtains of clean filtered oil instead of submersion.

Product experts will be on hand at the tradeshow, where they will be able to show you the IN’s and OUT’s of our extensive product range, along with the new product handling equipment range. 

 

WHAT ELSE WILL BE AT GULFOOD MANUFACTURING FROM HEAT AND CONTROL? 

 

E-FLO Electroporation system

Heat and Control E-flow electroporation system

E-FLO Electroporation system – making your potato chips, French fries and other products healthier. Our product experts will be able to explain what Electroporation is, how it works, and why all snack processors should invest in this equipment.

Gulfood Manufacturing 2017 in Dubai runs from the 31st October to 2nd November. Visit the Heat and Control booth in Hall 1 – Stand B1-4.