Potato Based Processing Plant
Potato based processing plant includes Frozen fries, Pureed potatoes, and other Frozen items changing urbanisation and ways of life. Potato handling with French fry or Chips require specific least necessities such as texture
Vege-Polisher™ V2B
Wyma's V2B Vege-Polisher™ has a rotating drum made up of rows of nylon brushes. Produce enters via a large infeed chute. Two water pipes spray fresh and/or recycled water on the produce as it travels through the drum.
Vege-Polisher™ V4
Our V4 Vege-Polisher™ has many features including automated machine operation and improved access for maintenance and cleaning. Our Vege-Polisher™ has a rotating drum made up of rows of nylon brushes. Produce enters via a large infeed chute.
Wet Hopper
Wyma's Wet Hopper provides a gentle pre-washing system, to receive produce into washing and packing lines. The system comprises hopper storage, a floor conveyor, discharge elevator and can also include optional add-ons and/or customized modules for a tailored solution.
Finger Grader
Flo-Mech's Finger Grader is an industrial stainless steel machine for custom sorting potatoes and tubers. The machine is directly adjustable, which means that production can continue while adjusting the settings.
ultra-clean® OC 3
Florigo ultra-clean® OC 3 conducts separation of stones from root vegetables, including potatoes through a cyclone effect.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Filter System
The Allround Filter system is designed to take out loose skin and dirt. Filtration is the separation of solids from the product by means of a filter belt, which retains the solids and allows the liquid to pass through.
Table Potato Washing and Grading line
Potato Processing line with a washing area, shake grader. The washing area contains a Destoner when there is a lot of dirt coming along with the produce, destoners are the ideal machines.
Frozen French Fries Plant
Manufacturing the French fries and the frozen French fry do not have much difference. It differs only in the final part of frying and freezing. The frozen French fries take lesser time to fry than the fresh French fries.
Potato Washing, Brushing & Grading line
Potato Processing line with washing, brushing, and grading. First, there is receiving and brushing area. Product pass from swan neck elevator and move from spiral roller set and brusher to reach the inspection and grading area.
intelli-flav® CLO 3
The tna intelli-flav® CLO 3 oil and flavour spray system enables the accurate application of oil and injected flavour – or just oil – requiring no mixing tanks and leaving minimal flavour residue.
Vibrating Piece Remover
Wyma's Vibrating Piece Remover removes unwanted produce pieces and debris early in your processing line and prior to packaging. Produce and debris are fed ontothe bed, which is made up of corrugated channels.
Sponsored Content
You May Also Like
Octal-ST Conveyors & Elevators
Octal-ST Conveyors & Elevators transport produce efficiently to different parts of your line. The belt runs on a low-maintenance, troughed slat bed for a smooth and even motion.
Water Treatment (Solids Removal)
Solids handling system designed to work in conjunction with washing or other solid saturated water systems. This system can be sized and implemented to produce clean recirculated water where solids removal is required.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Flo-Therm® G4 PC Oil Heater
Flo-Mech Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
