Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.
intelli-weigh® omega series
tna intelli-weigh® omega series of multi-head weighers was designed to provide a simple, yet efficient weighing process while running wet or dry applications.
E²E SteamClosure
The introduction of the E2E SteamClosure means those days are over. In conjunction with partner Solutherm, Tummers is continuing to expand the Emission to Energy (E2E) concept through the addition of this ingenious extraction system.
Quadra-Flow
QuadraFlow's many benefits range from results on French fries, wedges, and slices, to easy operation and user-friendliness.
Drum Dryer
Tummers is world market leader in potato flake lines. In a flakes line, the Drum Dryer dries the potato mash. A thin, perfectly distributed layer of mash is deposited onto the heated cylinder which evaporates excess moisture and creates a sheet of dried potato.
Sprint 2® Dicers
Sprint 2® Potato Dicer - 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.
intelli-flav® CLO 3
The tna intelli-flav® CLO 3 oil and flavour spray system enables the accurate application of oil and injected flavour – or just oil – requiring no mixing tanks and leaving minimal flavour residue.
Box Transport Unit
Allround box transport units are designed to speed up the process of box transport and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
Washing line Destoner/Washer unit
Tummers Washing line Destoner/Washer unit is a stainless steel machine combination for destoning and washing potatoes and tubers that was developed for 24/7 industrial use. Optionally the machine can be set up to separate floating parts (foliage and stalks) from your product.
You May Also Like
E TranSlicer® Cutters
The standard E TranSlicer Cutter (ETRS) accepts firm products up to 4" (101.6 mm) in diameter or leafy-type, compressible products up to 6" (152.4 mm). Interchangeable 20" (508 mm) diameter stainless steel cutting wheels reduce products with great precision and efficiency at high capacity.
Fry Line
Idaho Steel is active worldwide in designing, producing and installing complete processing lines, factory upgrades and individual machines for french fries.
Shake grading line SG120 series
SG 120 is designed for companies that are grading potatoes and onions up to 20-25 tons/hour. The line is especially suitable for seed potatoes.
Dry Peel Remover ZZ/ZicZac Brusher
Tummers Dry Peel Remover ZZ/ZicZac Brusher innovative stainless steel peel remover conveys potatoes and tubers after they have been steam-peeled, vertically between roller brushes in a zigzag arrangement to remove their peel and brush them.
ultra-clean® OC 3
Florigo ultra-clean® OC 3 conducts separation of stones from root vegetables, including potatoes through a cyclone effect.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
