Sprint 2® Dicers
Sprint 2® Potato Dicer - 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.
SensoLogic Family
The SensoLogic (SL) product family for chemometric spectroscopy is a comprehensive quantitative and qualitative solution that simplifies modeling and use of your applications with consistent workflow orientation and clear
Vegetable washing machines
The Allround vegetable washing machines are designed to operate with a water basin. In this water basin, the water used in the commercial vegetable washer is recirculated to be used again.
intelli-weigh® omega series
tna intelli-weigh® omega series of multi-head weighers was designed to provide a simple, yet efficient weighing process while running wet or dry applications.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
InProcess Software
InProcess makes the most of your production by allowing you to monitor, adjust and gain valuable data from your ZEISS spectrometers. Icon based and intuitive, InProcess is also fully customizable.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Drum Dryer
Tummers is world market leader in potato flake lines. In a flakes line, the Drum Dryer dries the potato mash. A thin, perfectly distributed layer of mash is deposited onto the heated cylinder which evaporates excess moisture and creates a sheet of dried potato.
Batch Fryer
Automatically produce consistently uniform kettle style potato chips with these Heat and Control Batch Fryers
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
Inspection unit in cabin
The Allround Cabin inspection is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
ultra-clean® WT 3
Florigo ultra-clean® WT 3 removes clay shells, sand and soil from potatoes and other root vegetables without damaging them.
Sponsored Content
You May Also Like
Flo-Therm® G4 SX Oil Heater
Flo-Mech Flo-Therm® G4 SX Oil Heater is a Direct Oil Heating Systems with Pollution Control
Flo-Cut® Model 360 Watergun Cutting Head
The Flo-Cut® Model 360 cutting head is designed for use in large volume watergun systems, or with the Urschel Model VSC Cutter. This unit can be integrated into watergun systems and offers fast, easy cutting head replacement for changing knives or sizes of cuts.
Storage hopper box tipper combinations
The storage hopper with box tipper is designed to act as a buffer with tipping possibility. A box with produce is placed into the tipper. The box tips and the products fall down into the storage hopper.
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
French Fries Line
Tummers Food Processing Solutions has built up extensive knowledge of potatoes as a raw material and the best methods for processing them.
Activated Roller Belt
Activated Roller Belt™ (ARB™) technology is a patented, automated conveyance solution that creates new possibilities for system or line layouts. Proven in thousands of installations worldwide, ARB equipment enables efficient, gentle
