Floating Debris Remover
Wyma's Floating Debris Remover is designed to sit above the tank of a Wet Hopper and prevent floating debris from clogging downstream equipment.
Creep Feed Hopper
Wyma's Creep Feed Hopper receives, stores, and conveys dirty produce that has a high level of dirt and clods. Wyma's Creep Feed Hopper is a dry hopper. It receives wet or dry produce with a high level of dirt and clods, allows for fast unloading and changeover time without starving your line of produce, and provides produce buffering.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Odyssey steam peeler
The Odyssey steam peeler incorporates TOMRA's control software, an enlarged steam peeling vessel, and a weigh hopper.
Flume Destoner
Wyma's Flume Destoner removes stones and clods from your produce flow to minimize damage to equipment and produce further down your processing line.
Mega-Tip Rotary Bin Tipper
Wyma's Mega-tip Rotary Box Tipper was custom designed for gentle tipping of very large boxs. It can tip boxes weighing up to 4.5t and measuring 3700mm wide (approx.).
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Combi-Washer
Our Combi-Washer integrates a Barrel Washer and Floating Debris Remover. Produce continues on to the Barrel Washer where it is washed (for more information, see Barrel-Washer).
Slurry On Demand Continuous Mixer
The Slurry-on-Demand Continuous Mixer is a recipe-driven, tank-less, continuous mixer that automatically and accurately mixes seasonings and liquids into homogeneous, lump-free slurries in the desired quantity demanded downstream.
Lift Roller Sizer
Wyma's Lift Roller Sizer has fully stainless steel construction and features mechanically driven rollers that turn consistently for more accurate sizing.
Hydro-Cooler for loose produce
Wyma Hydro-Coolers quickly reduce the core temperature of fresh produce, extending shelf life while preserving flavor and appearance. Water is sprayed over a heat exchanger which is cooled to several degrees below freezing by refrigerant.
Mini-Wet Hopper
Wyma's Mini Wet Hopper (for buffer storage) is great when you need in-line buffer storage and produce soak at the clean end of your line. It can also be used for chemical applications.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
Sponsored Content
You May Also Like
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
Shake Grading line SG80 series
The Allround Shake grader is designed to grade potatoes according to their square size. The potatoes are fed to the top of the machine onto the top sieve. The sieves in the machine shake in sequential frequencies, which causes the potatoes to move along on the sieves.
intelli-detect® 3
Protect your product from contamination with the tna intelli-detect® 3 – a highly accurate throat metal detector specially designed to detect contaminants of less than 0.5mm in diameter, in addition to any metals.
Web grading line SS 90 series
Web grading line SS 90 series hand feed inspection on outlet belt
Field Potato Sorter (FPS)
The FPS, Field Potato sorter, is a sensor based food sorter for unwashed potatoes, removing soil clods, stones and foreign material. It is a high volume, high capacity, robust machine for growers and packers that is built to last.
Fans
Fans are an integral part of the storage system, and therefore it is very important the proper type of fans are chosen for the right application. Furthermore, fans should be reliable and able to work under difficult
