TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Even-flow hopper
The Allround Even-flow hopper is used to dose the flow of product in a line. Mostly the Even-flow hopper is used in front of a Weighing machine or an optical sorter.
Washing line Roller Dryer
Tummers Washing Line Roller Dryer ensures that after washing and destoning the moisture still present is removed from the potatoes or tubers without affecting the product characteristics.
E²E-Condenser
Steam peeling is the most efficient way to peel potatoes, but the emission causes a loss of energy. The E²E-Condenser saves energy by condensing the emission and using the water for other purposes that take place further in the process.
Evenflow
Wyma's Evenflow Hopper is a combination conveyor and hopper. It evenly supplies produce to the next piece of equipment in your line (in a continuous process). It converts an irregular infeed supply to a constant outfeed flow.
Screen Piece Remover
Wyma's Screen Piece Remover effectively removes broken pieces, small stones and other debris from produce flow in a continuous process. It has a rotating screen with holes at a set size.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Combi-System
Wyma’s Combi-System is a Destoner, Barrel Washer and Debris Remover in one machine.
Peeler Module
Flo-Mech Peeler Module is designed to suit the customer’s needs – and whether a batch or continuous peeler system is required
Absorbent Drying Roller
Absorbent Drying Rollers remove excess moisture from the surface of fresh produce, reducing the risk of bacterial growth. The roller's porous surface draws in moisture as produce travels along the bed.
Screen Sizer
Wyma's Screen Sizer is a modular alternative to the Lift Roller Sizer that effectively sizes round produce in a continuous process. The Screen Sizer has a rotating screen with holes at a set size that separates produce into two sizes.
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
FastBack® Left Right Center (LRC) Diverting Weigher Infeed Solution
The FastBack Left Right Center (LRC) is a compact double multihead weigher feed solution designed to provide a precise, consistent product stream to Ishida's patented back-to-back 218 twin weigher.
Continuous Peeler
Flo-Mech's continuous abrasive potato peeler machine can process up to approximately 6 tonnes of potatoes per hour. Each roller in the potato peeling machine is driven separately.
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
Hermes Flavour Liquids and Solids system
Hermes is a piece of equipment designed for large-scale production due to its robustness and size allows to apply powdered liquids, flavors and salt simultaneously.
intelli-weigh® omega series
tna intelli-weigh® omega series of multi-head weighers was designed to provide a simple, yet efficient weighing process while running wet or dry applications.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
hyper-detect® 5
Protect your brand’s reputation with the tna hyper-detect® 5. This high-performance food metal detector system is uniquely designed to sit as close as possible to the multi-head weigher, significantly increasing bagging speed without compromising food safety.