Sormac Dipping tank DT

Sormac Dipping tank DT

Sormac Dipping tank DT

Bookmark
Sormac Dipping tank DT

Sormac Dipping tank DT

The dipping tank is used for root crops such as potatoes, carrots, etc., which require a controlled contact time with water (with or without additives). The product is collected in 8 compartments within the rotating drum which can accept approx. 25 kg of product per compartment.

The drum is mounted within a stainless steel water holding tank of approx. 1,400 liters. The product can be continually loaded into the machine and each compartment contra rotates submerging everything below the water surface.

The discharge of the product is on the opposite side of the infeed. Rotational dwell times are controlled with average parameters between 1-5 minutes.

The dipping tank is completely manufactured in stainless steel and equipped with a drain valve and two manhole openings for cleaning access.

Features
 
  • suitable for floating and non-floating product
  • dwell times can be simply adjusted by a speed controller
  • very solid construction
The dipping tank processes product with a maximum diameter of 200 mm.

Capacity

The capacity is dependent on the dwell time and is between 1,000 – 5,000 kg per hour with a dwell time of 5 to 1 minute.

Sormac Knife Peeler MS

The Sormac knife peelers MS are suitable for continuous peeling of pre-washed or pre-peeled root products, like potatoes, red beet, celeriac etc.

Sormac Potato halving and quartering machine DMA

Sormac DMA-90 has the capability to cut potatoes into 2, 4 or 8 pieces. The product must be supplied in doses. The machine has a stable frame, aligning rollers, and a cutting section with a centring and knife block.

Sormac Peeling machine CBS / MBS

The Sormac peeling machine is ideal for carborundum and knife peeling of root products such as potatoes, celeriac, kohlrabi, red beets, and baby carrots.

Sormac Roller peeler CRP

Sormac Roller Peeler is suitable for the continuous peeling of root products such as potatoes, carrots, kohlrabi, red beets, celeriac, etc. The machine is executed with 10 or 12 peeling rollers
Sormac B.V.

Sormac B.V.

Sormac B.V. is a world-leading developer and manufacturer of machinery and processing lines for the fresh-cut industry. They have a strong record in peeling machines for potatoes, carrots, and onions, and they are the most progressive supplier for washing and drying systems for leafy vegetables.

Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content