ultra-clean® WT 3
Florigo ultra-clean® WT 3 removes clay shells, sand and soil from potatoes and other root vegetables without damaging them.
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
Transport Belts
The Allround transport belts are designed to transport produce over long distances. There are several variations of belts. Each variation is intended for a different purpose.
Box tipper
Box tippers are designed to feed processing lines or machines. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
Troughed Conveyors & Elevators
Wyma's Troughed Conveyor & Elevator range is suitable for very dirty produce or situations where many stones are mixed with the produce. This range can also be used for high-load applications.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Continuous Peeler
Flo-Mech's continuous abrasive potato peeler machine can process up to approximately 6 tonnes of potatoes per hour. Each roller in the potato peeling machine is driven separately.
Gooseneck Box Filler
Wyma's Gooseneck Bin Filler gently fills bins with produce. The gooseneck outfeed means the distance between the end of the elevator and the bottom of the bin is minimal to avoid produce damage.
Vibrating Length Sizer
Wyma's Vibrating Length Sizer sizes long produce prior to packaging. Produce is fed onto the sizer bed, made up of corrugated channels. The bed vibrates to spread produce across its width.
intelli-flav® CLO 3
The tna intelli-flav® CLO 3 oil and flavour spray system enables the accurate application of oil and injected flavour – or just oil – requiring no mixing tanks and leaving minimal flavour residue.
Box Storage
With Allround box storage the products are stored in large bins. The product is stacked up to about 6 boxes high. Box storage is a very flexible way to store agricultural products.
Elevator
Flo-Mech feed elevator is manufactured from RHS stainless steel. Blue modular flighted belt with an integrated C.I.P system to clean belt and sprockets.
Sponsored Content
You May Also Like
Steam Peeling
Steam peeling is the most efficient method of removing skin from vegetables and fruit. Lines processing between 1,000 kg/hr–65,000 kg/hr can benefit from TOMRA’s produce steam peeling equipment, resulting in savings of raw material and energy.
Eco Steam Peeler
The Eco Steam Peeler leads the food processing industry in the pursuit of the highest peeling performance and reduced waste to enable processors to achieve sustainability objectives in their food production.
Cyclone Destoner
Wyma's Cyclone Destoner gently separates stones from produce. Produce and stones are fed into a moving well of water in the Cyclone Destoner cone.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Flo-Therm® G4 PC Oil Heater
Flo-Mech Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
Peeling line Delta Roller Spreader
The Tummers Peeling Line Delta Roller Spreader has specially been developed for gentle transport to a wider product flow. This machine is commonly used to feed potatoes from the outfeed of a screw conveyor to a wide sorter, but is suitable for a wide variety of food products.
