roflo® HM 3
The tna roflo® HM 3 is a high-performance food conveyor system that handles products gently, yet efficiently, using a slow, forward horizontal motion, followed by a fast return horizontal motion.
H-Flow Conveyor®
The H-Flow Conveyor® guarantees less product breakage and loss of coating and flavouring, compared to vibratory transfer systems.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Floating Debris Remover
Wyma's Floating Debris Remover is designed to sit above the tank of a Wet Hopper and prevent floating debris from clogging downstream equipment.
Mobile washer PD 500
Allround Mobile washer PD 500 washing machine is designed for cleaning produce. After the produce falls into the water it floats to a rotating drum. While the produce floats, stones and dirt sink to a waste belt at the back of the machine.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Accumulation Trays
Optimize product flow regulations and homogenize the flow rate, using accumulation hoppers as required.
Flo-Therm® G4 SX Oil Heater
Flo-Mech Flo-Therm® G4 SX Oil Heater is a Direct Oil Heating Systems with Pollution Control
Brushing Machines
The Allround brushing machine is designed to clean vegetables and potatoes using brushes that have a wave shape. The vegetables are transported through mass. Underneath the brushes, a box or transport belt can be placed to collect the dust.
Industrial Potato washing line 500 series
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Flo-Peel® Batch Peeling
Flo-Mech Flo-Peel™ has become the industry standard for batch abrasive peeling.
Sponsored Content
You May Also Like
ener-freeze® FFV 3
Ferguson ener-freeze® FFV 3 is a cooling and freezing solution with innovative air flow distribution technology to evenly freeze various potato products and shapes.
Model VSC Segment Cutter
The Model VSC produces a wide range of segments, slabs, or rectangular strips. Several different cutting set-ups are available including standard heads, Flo-Cut® Model 360 heads, and Velocicut® heads. Consult your local Urschel sales representative for the cutting head best-suited for our application.
intelli-flav® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
Elevators
The Allround elevators are designed to overcome heights in production lines. The machine is designed to transport the products in a gentle but fast manner.
batch-pro® 12
FOODesign batch-pro® 12 batch fries a wide selection vegetable chips including potato, taro, banana and plantain.
Potato Washing Line for Processing
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled. This is line includes the washing machine U 500.
