Storage hopper box tipper combinations
The storage hopper with box tipper is designed to act as a buffer with tipping possibility. A box with produce is placed into the tipper. The box tips and the products fall down into the storage hopper.
wet washdown VFFS system arctic® 3
A vertical form, fill and seal (VFFS) food packaging solution, the tna arctic®3 is constructed from anti-corrosive stainless steel, handles wet washdown cleaning and meets strict sanitary requirements.
Octal-S Conveyors & Elevators
Wyma's Octal-S Conveyors & Elevators transport produce efficiently to different parts of your line. The belt runs on a low-maintenance slat bed for a smooth and even motion.
Industrial Potato washing line 600 series
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
ultra-peel® ODC 3
The perfect pair for its steam peeling counterpart, the tna ultra-peel ODC 3 is a dry de-skinning system with a difference.
Flo-Therm® G4 SX Oil Heater
Flo-Mech Flo-Therm® G4 SX Oil Heater is a Direct Oil Heating Systems with Pollution Control
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Box Tipping/Hopper Systems
Flo-Mech offers a range of box or crate tipping and unloading systems along with buffer hoppers to suit your requirements.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Sensors
Optimal storage conditions can only be achieved with the help of accurate sensors. Allround produces its temperature sensors in their own factory where they are produced under optimal conditions
Vibrating Length Sizer
Wyma's Vibrating Length Sizer sizes long produce prior to packaging. Produce is fed onto the sizer bed, made up of corrugated channels. The bed vibrates to spread produce across its width.
Roller Inspection Table
Wyma's Roller Inspection Table conveys produce for manual and visual inspection. Rollers run on a heavy-duty chain around a bed with rubber strips on the top edge.
Hydro-Cooler for boxed produce
Wyma Hydro-Coolers quickly reduce the core temperature of fresh produce, extending shelf life while preserving flavor and appearance.
Sponsored Content
You May Also Like
Combi-System
Our Combi-System combines a Tank Destoner, Barrel Washer and Floating Debris Remover. Produce and stones are fed into the Tank Destoner.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
Polisher
Allround polishers are designed to polish produce. The TD (turning drum) machine consists of a rotating drum with counter-rotating brushes.
Belt Inspection Table
Wyma's Belt Inspection Table conveys produce for manual and visual inspection. If produce is very dirty, an optional web belt can allow dirt, debris and water to fall through so they are not carried further down the processing line.
Octal-R Conveyors & Elevators
Wyma's Octal-R Conveyors & Elevators transport produce efficiently to different parts of your line. Produce is fed on to the conveyor or elevator and is transported in the direction of belt motion.
Peeling line
Tummers peeling lines for the peeling and after-washing of potatoes and tubers are developed with the purpose of high-quality end product and minimal skin loss.
