Model CC Turntable
The Model CC turntable assists with head maintenance. Now available, the new Model CC turntable assists processors with a variety of tasks to save time and effort.
robag® 3e
The new tna robag® 3e is the latest iteration of the industry-leading tna robag® packaging series. The new tna robag® 3e takes control sophistication to an unprecedented level with real-time communication software and smart diagnostics.
E-FLO™ Electroporation System
E-FLO is an Electroporation system that uses pulse electric fields (PEF) technology. The system sends PEF through the cell walls of potatoes and root vegetables and perforates the cell membranes with microscopic holes.
intelli-flav® CLS 3
Deliver consistent seasoning application every time with the tna intelli-flav® CLS 3. This flavour spray system is specifically designed for raw powder and oil slurry combinations.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
ThermoDrive Series 8140
With the release of ThermoDrive Series 8140, food industry manufacturers can now purchase high-quality, hygienic lug-driven belts supported by Intralox’s expertise and guarantees.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Mega-Tip Rotary Bin Tipper
Wyma's Mega-tip Rotary Box Tipper was custom designed for gentle tipping of very large boxs. It can tip boxes weighing up to 4.5t and measuring 3700mm wide (approx.).
Medium Potato Line
Medium Potato line is a 25-ton line which has two receiving options. Produce may be received directly from a field harvest truck or via storage bins using an Electric Bin Tipper.
Peeling line
Tummers peeling lines for the peeling and after-washing of potatoes and tubers are developed with the purpose of high-quality end product and minimal skin loss.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
Receiving Hopper
The Allround Receiving Hopper is designed to feed or act as a buffer in loading and unloading lines or processing lines. The hopper is designed in such a way that it can be fed by tip trailers, box tippers, and big bags.
tna conti-pro® DAL 3
Florigo conti-pro® DAL 3 is a continuous dal frying system that features a product transport system that increases product quality while reducing product loss.
Sponsored Content
You May Also Like
accura-dry® BD 3
Ferguson accura-dry® BD 3 is a drying solution, removing moisture from French fries before frying.
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Fryer for Batter-coated French Fries
Over 16,000 kg/h of finished crispy batter-coated french fries can be produced for fast-food lovers using Heat and Control's latest batter applicator and multi-zone fryer system.
Belt Inspection Table
Wyma's Belt Inspection Table conveys produce for manual and visual inspection. If produce is very dirty, an optional web belt can allow dirt, debris and water to fall through so they are not carried further down the processing line.
Multi-zone continuous Fryers
The Heat and Control Multi-Zone Potato Chip Fryers deliver the ultimate in processing flexibility. Used to produce most of the world’s potato chips, these fryers deliver superior product quality, clean operation and total reliability
