DirectDrive System
The DirectDrive™ System (DDS™) spiral technology from Intralox is a flexible, low-energy solution to increase efficiency in can-making plants that functions both single- and bi-directionally.
Octal-R Conveyors & Elevators
Wyma's Octal-R Conveyors & Elevators transport produce efficiently to different parts of your line. Produce is fed on to the conveyor or elevator and is transported in the direction of belt motion.
Food Pump
The Pomac CP-AGF program comprises a range of stainless steel pumps, suited for pumping potatoes, vegetables and fruits, without damaging them.
hydro-clear® OWB 3
Florigo hydro-clear® OWB 3 is a solution for stripping water from both the top and bottom of potato slices before frying.
H-Flow Conveyor®
The H-Flow Conveyor® guarantees less product breakage and loss of coating and flavouring, compared to vibratory transfer systems.
Inspection unit in cabin
The Allround Cabin inspection is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Space Finder
The Allround Space Finder is designed in such a way that bulk stores are filled in the most effective manner. The Space Finder makes sure every inch of the storage facility is used.
Accumulation Trays
Optimize product flow regulations and homogenize the flow rate, using accumulation hoppers as required.
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
FastBack® Blending System
FastBack Blending Systems offer manufacturers the most economical, accurate, and consistent means of delivering product blends to multiple scales in a variety of environments.
Creep Feed Hopper
Wyma's Creep Feed Hopper receives, stores, and conveys dirty produce that has a high level of dirt and clods. Wyma's Creep Feed Hopper is a dry hopper. It receives wet or dry produce with a high level of dirt and clods, allows for fast unloading and changeover time without starving your line of produce, and provides produce buffering.
Small line to pack potatoes
In this example of a small line to pack potatoes (5 ton per hour), produce can be received onto an Elevator where they are fed into a Horizontal Debris Remover, to remove loose dirt, vine, and other debris.
Sponsored Content
You May Also Like
Roller Conveyors & Elevators
Roller Conveyors transport boxes, bins or crates from packing stations, crate fillers or weighing stations.
Box Fillers
Allround box fillers are designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the fall height is reduced as much as possible.
Reverse box tipper
When an empty box is put in its place box will tip at an angle. While the box is filled he slowly tips back. This way of filling minimizes the product damage.
Drop Limit Box Tipper
The Drop limit box tipper is a box tipper where the drop is limited, which leads to less damage to the product. The tilting of the box is done in three steps: The cubic box is put into the machine, after which the crate is clamped against a cover plate.
Mini-Wet Hopper
Wyma's Mini Wet Hopper (for buffer storage) is great when you need in-line buffer storage and produce soak at the clean end of your line. It can also be used for chemical applications.
Vibrating Length Sizer
Wyma's Vibrating Length Sizer sizes long produce prior to packaging. Produce is fed onto the sizer bed, made up of corrugated channels. The bed vibrates to spread produce across its width.
