KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Model CC Turntable
The Model CC turntable assists with head maintenance. Now available, the new Model CC turntable assists processors with a variety of tasks to save time and effort.
TranSlicer® 2510 Cutter
The TranSlicer 2510 Cutter accepts compressible food products up to 8" (203 mm) in diameter, or firm products up to 6-3/4" (171 mm) in diameter — precutting may be necessary. Optional static hold-down assembly is available to maintain positive feeding assistance.
Cutting line Switcher
Tummers Cutting line Switcher is a stainless steel, industrial switcher for changing cutting blocks either automatically or manually, and without interrupting your production. They can be Operated with a front-mounted touch screen.
Grader-Halver
A cost-effective solution designed to consistently grade potatoes according to size then halve any that are larger than the predetermined size.
Fastlane
Heat and Control Fastlane infeed conveyors offer Easy, safe and cost-effective delivery of a singulated stream of potatoes to multiple slicers.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Comitrol® Processor Model 2100
This machine is used for reducing into flakes or granulation for further processing.
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
M VersaPro® Dicer
The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower.
E TranSlicer® Cutters
The standard E TranSlicer Cutter (ETRS) accepts firm products up to 4" (101.6 mm) in diameter or leafy-type, compressible products up to 6" (152.4 mm). Interchangeable 20" (508 mm) diameter stainless steel cutting wheels reduce products with great precision and efficiency at high capacity.
You May Also Like
Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
Sprint 2® Dicers
Sprint 2® Potato Dicer - 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
Flo-Cut® Sizer-Halver
Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
