Potato Flake Line
Idaho Steel along with its strategic partners, Kiremko, Reyco, and others, is one of the few partnerships in the world that offer a complete potato flake line.
Model VSC Segment Cutter
The Model VSC produces a wide range of segments, slabs, or rectangular strips. Several different cutting set-ups are available including standard heads, Flo-Cut® Model 360 heads, and Velocicut® heads. Consult your local Urschel sales representative for the cutting head best-suited for our application.
Vegetable washing machines
The Allround vegetable washing machines are designed to operate with a water basin. In this water basin, the water used in the commercial vegetable washer is recirculated to be used again.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Storage Hoppers
The Allround Storage Hoppers are designed to act as a buffer in a processing line or between a processing line and a packing line. The Storage Hoppers are designed to be built in segments.
Food Pump
The Pomac CP-AGF program comprises a range of stainless steel pumps, suited for pumping potatoes, vegetables and fruits, without damaging them.
Field Potato Sorter (FPS)
The FPS, Field Potato sorter, is a sensor based food sorter for unwashed potatoes, removing soil clods, stones and foreign material. It is a high volume, high capacity, robust machine for growers and packers that is built to last.
Shake Grading line SG80 series
The Allround Shake grader is designed to grade potatoes according to their square size. The potatoes are fed to the top of the machine onto the top sieve. The sieves in the machine shake in sequential frequencies, which causes the potatoes to move along on the sieves.
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
Polisher
Allround polishers are designed to polish produce. The TD (turning drum) machine consists of a rotating drum with counter-rotating brushes.
Continuous Peeler
Flo-Mech's continuous abrasive potato peeler machine can process up to approximately 6 tonnes of potatoes per hour. Each roller in the potato peeling machine is driven separately.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
You May Also Like
Brushing Machines
The Allround brushing machine is designed to clean vegetables and potatoes using brushes that have a wave shape. The vegetables are transported through mass. Underneath the brushes, a box or transport belt can be placed to collect the dust.
Pulsemaster Compact PEF system
Pulsemaster Compact PEF system is a robust, all-in-one unit with a small footprint, which is designed to suit small and mid-scale production lines. The Compact PEF system is easy to install in a production line, quick to start up and has low energy and water requirements. This Compact PEF system can process up to an impressive 10 tons per hour at PEF.
Radial grader
The Allround Radial grader is equipped with laterally placed grading rolls out of stainless steel. The distance between these rolls changes in steps over the different grading stages. Conveyor belts are placed under the machine, one for each grading size.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Multi-Zone Chips Frying System
Rosenqvists Food Technologies have designed the Multi-Zone Chips Fryer to give the final product the desired characteristics, for optimal control of the frying process.
Fryer for Batter-coated French Fries
Over 16,000 kg/h of finished crispy batter-coated french fries can be produced for fast-food lovers using Heat and Control's latest batter applicator and multi-zone fryer system.
