Ishida IX-G2 X-Ray Inspection
The new Ishida IX-G2 X-ray inspection systems uses a unique dual energy process that compares absorption of x-rays on two levels, avoiding problems from overlapping products.
Industrial Potato washing line 600 series
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
Peeling line
Tummers peeling lines for the peeling and after-washing of potatoes and tubers are developed with the purpose of high-quality end product and minimal skin loss.
M VersaPro® Dicer
The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower.
Potato washing, brushing and grading line
Potato Processing line with a washing area, brushing area, and grading area.
Shake Grading line SG80 series
The Allround Shake grader is designed to grade potatoes according to their square size. The potatoes are fed to the top of the machine onto the top sieve. The sieves in the machine shake in sequential frequencies, which causes the potatoes to move along on the sieves.
French Fries Line
Tummers Food Processing Solutions has built up extensive knowledge of potatoes as a raw material and the best methods for processing them.
Water Treatment (Solids Removal)
Solids handling system designed to work in conjunction with washing or other solid saturated water systems. This system can be sized and implemented to produce clean recirculated water where solids removal is required.
Transport Belts
The Allround transport belts are designed to transport produce over long distances. There are several variations of belts. Each variation is intended for a different purpose.
Inspection unit in cabin
The Allround Cabin inspection is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Duo Telescopic Belt
The Allround duo telescopic belt is designed to facilitate the loading and unloading of products in storage facilities. The belts are usually placed behind a space finder or pick-up scooter
You May Also Like
Flo-Grade® Scroll Grader
The Flo-Grade™ has been developed to be installed with our Flo-Cut™ sizer halver unit or on its own as a stand-alone potato or tuber grader. It has a tapered screw design for gentle grading and transfer of potatoes.
ultra-peel® SKC 3
Florigo ultra-peel® SKC 3 is an abrasive peeler that operates in batches, weighing your product, to ensure optimized peeling results from small, medium and large potatoes for the production of potato chips.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
Storage hopper box tipper combinations
The storage hopper with box tipper is designed to act as a buffer with tipping possibility. A box with produce is placed into the tipper. The box tips and the products fall down into the storage hopper.
Even-flow hopper
The Allround Even-flow hopper is used to dose the flow of product in a line. Mostly the Even-flow hopper is used in front of a Weighing machine or an optical sorter.
ultra-peel SSC 3
Florigo ultra-peel SSC 3 is a cost-effective steam peeling solution for potatoes and other root vegetables with low maintenance costs, thanks to a minimum of wearing parts.
