quik-coat® MD 5
tna quik-coat® MD 5 is the ultimate mandrel dispensing unit that applies a variety of free flowing ingredients consistently onto the top of products passing underneath. The tna quik-coat® MD 5 is custom configured for width and ingredients.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Form Line
Idaho Steel is active worldwide in designing, producing and installing complete processing lines, factory upgrades and individual machines for formed potato specialties. Formed potato specialties have been around for decades.
E²E-Condenser
Steam peeling is the most efficient way to peel potatoes, but the emission causes a loss of energy. The E²E-Condenser saves energy by condensing the emission and using the water for other purposes that take place further in the process.
Even Flow Bins
Southern Fabrication Works offers a range of even flow bins with a wide range of capacities an with multiple filling and discharge options, designed to create a smooth and consistent product flow
Pellet Feed System
Pellet bag filling station structure is manufactured from RHS stainless steel or a mild steel with painted or galvanized finish.
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
wet washdown VFFS system arctic® 3
A vertical form, fill and seal (VFFS) food packaging solution, the tna arctic®3 is constructed from anti-corrosive stainless steel, handles wet washdown cleaning and meets strict sanitary requirements.
Steam Peeling
Steam peeling is the most efficient method of removing skin from vegetables and fruit. Lines processing between 1,000 kg/hr–65,000 kg/hr can benefit from TOMRA’s produce steam peeling equipment, resulting in savings of raw material and energy.
ultra-clean® WT 3
Florigo ultra-clean® WT 3 removes clay shells, sand and soil from potatoes and other root vegetables without damaging them.
You May Also Like
Peeling line
Tummers peeling lines for the peeling and after-washing of potatoes and tubers are developed with the purpose of high-quality end product and minimal skin loss.
Potato Processing Line 450 series
Potato Processing line with a washing area, polisher, shake grader. The washing area contains a Destoner when there is a lot of dirt coming along with the produce, destoners are the ideal machines.
robag® 3e
The new tna robag® 3e is the latest iteration of the industry-leading tna robag® packaging series. The new tna robag® 3e takes control sophistication to an unprecedented level with real-time communication software and smart diagnostics.
Mobile washer PD 500
Allround Mobile washer PD 500 washing machine is designed for cleaning produce. After the produce falls into the water it floats to a rotating drum. While the produce floats, stones and dirt sink to a waste belt at the back of the machine.
Destoner machine
The Allround VP destoner machine is designed to remove dirt and stones. When there is a lot of dirt coming along with the produce, destoners are the ideal machines. The machine can be integrated into a washing machine for an even cleaner end result.
roflo® VM 3
The tna roflo® VM 3 is a high-performance food conveyor system that uses horizontal vibratory motion to evenly distribute products, while offering an efficient method for in-line storage. Its versatile design features a variety of pan options to suit every production need.
