Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Space Finder
The Allround Space Finder is designed in such a way that bulk stores are filled in the most effective manner. The Space Finder makes sure every inch of the storage facility is used.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Wet hopper
The Allround Wet hopper, previously called Jacuzzi, is used as a pre-cleaning device. The product falls in the water, where the sticky soil makes it heavier.
intelli-spin® 100 series
Arcall intelli-spin® 100 series is a cantilever spray system that uses spinning disc technology to provide accurate and consistent liquid and slurry application.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Fresh Mash Line
Idaho Steel is active worldwide in designing, producing and installing complete processing lines, factory upgrades and individual machines for potato specialties.
Batch Fryer
Automatically produce consistently uniform kettle style potato chips with these Heat and Control Batch Fryers
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
conti-cut hydro cutting system
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
Peeling line Delta Roller Spreader
The Tummers Peeling Line Delta Roller Spreader has specially been developed for gentle transport to a wider product flow. This machine is commonly used to feed potatoes from the outfeed of a screw conveyor to a wide sorter, but is suitable for a wide variety of food products.
Finger Grader
Flo-Mech's Finger Grader is an industrial stainless steel machine for custom sorting potatoes and tubers. The machine is directly adjustable, which means that production can continue while adjusting the settings.
Sponsored Content
You May Also Like
Model CC Slicer
Food processors rely on the Urschel Model CC (MCC) to produce precise, uniform slices, strips cuts, shreds, and granules at high production capabilities with excellent results.
PeelGuard®
The PeelGuard collects data on the peeled product such as size, defects and peel removed and can also optimize the settings of the steampeeler
Adjustable roller sets
The Allround Adjustable roller sets are designed for pre-cleaning and pre-grading. They can be mounted on all types of Allround Hoppers. The Allround Adjustable roller sets are available with Stainless steel roller, Spiral rollers, and Diabolic roller.
Allround Fixed Roller sets
The Allround Fixed roller sets are designed to take out loose skin and dirt. This raises the capacity of the line and reduces the amount of dirt in the other machines and is the most gentle and efficient way of pre-cleaning.
Flo-Pump Transfer System
Flo Mech Pumping systems is designed to gently transfer product from A to B
Steam Peeling
Steam peeling is the most efficient method of removing skin from vegetables and fruit. Lines processing between 1,000 kg/hr–65,000 kg/hr can benefit from TOMRA’s produce steam peeling equipment, resulting in savings of raw material and energy.
