quik-coat® MD 5
tna quik-coat® MD 5 is the ultimate mandrel dispensing unit that applies a variety of free flowing ingredients consistently onto the top of products passing underneath. The tna quik-coat® MD 5 is custom configured for width and ingredients.
Box Fillers
Allround box fillers are designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the fall height is reduced as much as possible.
Flo-Cut® Sizer-Halver
Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
STRATA Invicta®
The STRATA Invicta® sets the new standard in steam peeling systems, offering the highest yield at the shortest possible cycle times.
Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
E TranSlicer® Cutters
The standard E TranSlicer Cutter (ETRS) accepts firm products up to 4" (101.6 mm) in diameter or leafy-type, compressible products up to 6" (152.4 mm). Interchangeable 20" (508 mm) diameter stainless steel cutting wheels reduce products with great precision and efficiency at high capacity.
Rinsing / Starch Washing Systems
Flo-Mech Rinsing / Washing systems design for removing surface starch. Flo-Mech offer a range of solutions to remove surface starch from peeled / cut potatoes before the next stag of the process.
Pick Up scooter APS 250
The Allround Pick Up scooter APS 250 is designed to empty bulk storage facilities. The bulk stores are cleared by the Pick-Up scooter by scooping up the produce. There is one driver needed, who will be working in comfort.
IQF Tunnel Freezer
NSSPL Individual Quick Freezing Tunnel Freezers are designed to discrete and freeze all products e.g. vegetables, fruits, seafood, meat, and dairy providing high products yield.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
Sponsored Content
You May Also Like
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Primary Oil Filter
The Primary Oil Filter filters the oil of an entire frying system, making sure the oil is clean and crumb-free. With the very narrow pass, the POF provides a better result than most other filters installed in this part of a processing line.
Wet hopper
The Allround Wet hopper, previously called Jacuzzi, is used as a pre-cleaning device. The product falls in the water, where the sticky soil makes it heavier.
Potato Cleaning, Grading and Retail Packaging line
Potato cleaning, grading and retail packaging line
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
quik-coat® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
