Inspection unit in belt
The Allround Belt inspection table is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Storage hopper box tipper combinations
The storage hopper with box tipper is designed to act as a buffer with tipping possibility. A box with produce is placed into the tipper. The box tips and the products fall down into the storage hopper.
Slurry On Demand Continuous Mixer
The Slurry-on-Demand Continuous Mixer is a recipe-driven, tank-less, continuous mixer that automatically and accurately mixes seasonings and liquids into homogeneous, lump-free slurries in the desired quantity demanded downstream.
Continuous sorter
Tummers Continuous sorter is an industrial stainless steel machine for custom sorting of potatoes and tubers. The machine is directly adjustable, which means that production can continue while adjusting the settings.
roflo® VM 3
The tna roflo® VM 3 is a high-performance food conveyor system that uses horizontal vibratory motion to evenly distribute products, while offering an efficient method for in-line storage. Its versatile design features a variety of pan options to suit every production need.
Wet hopper
The Allround Wet hopper, previously called Jacuzzi, is used as a pre-cleaning device. The product falls in the water, where the sticky soil makes it heavier.
Vegetable washing machines
The Allround vegetable washing machines are designed to operate with a water basin. In this water basin, the water used in the commercial vegetable washer is recirculated to be used again.
Fryer for Batter-coated French Fries
Over 16,000 kg/h of finished crispy batter-coated french fries can be produced for fast-food lovers using Heat and Control's latest batter applicator and multi-zone fryer system.
clear-cut® SWM 3
Florigo clear-cut® SWM 3 is an efficient water cutting system that is able to handle a variety of cutting styles for potatoes – all while eliminating product damage.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Box Tipping/Hopper Systems
Flo-Mech offers a range of box or crate tipping and unloading systems along with buffer hoppers to suit your requirements.
Micro Adjustable Shape Cuts SL14
The Urschel MicroAdjustable® Slicing Head (SL-14) offers maximum cutting action and expedient knife changeovers for your potato chips production line.
You May Also Like
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Flo-Wash® SBW
Flo-Mech Flo-Wash® submerged barrel washing system ensures a clean product, ready for further processing.
Membrana
PEF specialist Pulsemaster offers a conductivity measurement device to both the food and beverage industry, as well as the scientific sector. This unit is instrumental in the quantification of a pulsed electric field treatment on e.g. potato tissue.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Brushing Machines
The Allround brushing machine is designed to clean vegetables and potatoes using brushes that have a wave shape. The vegetables are transported through mass. Underneath the brushes, a box or transport belt can be placed to collect the dust.
robag® 3ci TX series
A vertical form, fill and seal (VFFS) food packaging machine capable of packing up to 150 bpm*, the tna robag® TX 3ci is their original, trusted system.
