Shake Grader
The Allround Shake grader is designed to grade potatoes according to the square size. The potatoes are fed to the top of the machine onto the top sieve. The sieves in the machine shake in sequential frequencies, which causes the potatoes to move along on the sieves.
Small line to pack potatoes
In this example of a small line to pack potatoes (5 ton per hour), produce can be received onto an Elevator where they are fed into a Horizontal Debris Remover, to remove loose dirt, vine, and other debris.
Finger Grader
Flo-Mech's Finger Grader is an industrial stainless steel machine for custom sorting potatoes and tubers. The machine is directly adjustable, which means that production can continue while adjusting the settings.
Roller Inspection Table
Wyma's Roller Inspection Table conveys produce for manual and visual inspection. Rollers run on a heavy-duty chain around a bed with rubber strips on the top edge.
Belt Inspection Table
Wyma's Belt Inspection Table conveys produce for manual and visual inspection. If produce is very dirty, an optional web belt can allow dirt, debris and water to fall through so they are not carried further down the processing line.
TOMRA 5A
The TOMRA 5A sorting machine brings more than 98% removal rate of foreign objects, quality inspection and peel quality control to the table.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Tank Destoner
Wyma's Tank Destoner provides gentle stone and clod separation from produce prior to washing and reinspection cycles. Produce, stones and debris enter the water-filled tank, where a water jet directs the movement of produce towards the outfeed.
Flo-Cut® Sizer-Halver
Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
TOMRA 3A
Boasting the highest capacity on the market, the TOMRA 3A is the most robust, reliable and cost-effective optical sorter available for growers.
Spool Sizer
Wyma's Spool Sizer gently sizes round produce into two sizes. Our Spool Sizer has a series of rotating rollers fitted with spools set apart at a specified distance.
Washing lines
Tummers offers washers/destoners with a capacity ranging from 15 tonnes/hr to 180 tonnes/hr and continues to develop for more efficiency and better quality.
Web grading line SS 90 series
Web grading line SS 90 series hand feed inspection on outlet belt
Sponsored Content
You May Also Like
KW Washing and Destoning Combo
The KW Washer destoner is a thoughtful combination of a drum washer, destoner and tools to remove floating debris. The unit has several options to manage water level and flow, allowing customization to your local conditions and product(s)
Hedgehog Top Remover
The Wyma Hedgehog Top Remover removes carrot tops, loose dirt and leaves, etc from produce flow. Produce and debris are fed onto the upwardly rotating belt.
Lift Roller Sizer
Wyma's Lift Roller Sizer has fully stainless steel construction and features mechanically driven rollers that turn consistently for more accurate sizing.
Floating Debris Remover
Wyma's Floating Debris Remover is designed to sit above the tank of a Wet Hopper and prevent floating debris from clogging downstream equipment.
Screen Piece Remover
Wyma's Screen Piece Remover effectively removes broken pieces, small stones and other debris from produce flow in a continuous process. It has a rotating screen with holes at a set size.
Radial grader
The Allround Radial grader is equipped with laterally placed grading rolls out of stainless steel. The distance between these rolls changes in steps over the different grading stages. Conveyor belts are placed under the machine, one for each grading size.
