Brushing Machines
The Allround brushing machine is designed to clean vegetables and potatoes using brushes that have a wave shape. The vegetables are transported through mass. Underneath the brushes, a box or transport belt can be placed to collect the dust.
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
Water Treatment (Solids Removal)
Solids handling system designed to work in conjunction with washing or other solid saturated water systems. This system can be sized and implemented to produce clean recirculated water where solids removal is required.
M VersaPro® Dicer
The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower.
Box tipper
Box tippers are designed to feed processing lines or machines. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
quik-coat® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
hydro-wash® SW 3
Florigo hydro-wash® SW 3 is a slice washing system that removes starch and collects full size potato slices in a single layer for even frying.
InProcess Software
InProcess makes the most of your production by allowing you to monitor, adjust and gain valuable data from your ZEISS spectrometers. Icon based and intuitive, InProcess is also fully customizable.
Belt Inspection Table
Wyma's Belt Inspection Table conveys produce for manual and visual inspection. If produce is very dirty, an optional web belt can allow dirt, debris and water to fall through so they are not carried further down the processing line.
Elevator
Flo-Mech feed elevator is manufactured from RHS stainless steel. Blue modular flighted belt with an integrated C.I.P system to clean belt and sprockets.
Box Transport Unit
Allround box transport units are designed to speed up the process of box transport and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.
French Fries Line
Tummers Food Processing Solutions has built up extensive knowledge of potatoes as a raw material and the best methods for processing them.
Sponsored Content
You May Also Like
Frozen French Fries Plant
Manufacturing the French fries and the frozen French fry do not have much difference. It differs only in the final part of frying and freezing. The frozen French fries take lesser time to fry than the fresh French fries.
Washing lines
Tummers offers washers/destoners with a capacity ranging from 15 tonnes/hr to 180 tonnes/hr and continues to develop for more efficiency and better quality.
Elea PEFPilot Dual trial system
Elea offers a trial batch system capable of treating solids and liquids for scientific and pilot scale applications with up to 10 L treatment volume.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
Slicer Module
Flo-Mech complete module for slicing of product on stainless steel platforms with flumes, integrated equipment, steel work, decking, stairs, handrail kick strips.
