Palletizer
The VPM – 5 ECO Palletizer makes automatic palletizing accessible for every company by combining the experience from Verbruggen Palletizing Solutions with the production experience of Allround India.
FoodSafe Modular Plastic Belting (MPB) Portfolio
The Intralox FoodSafe Modular Plastic Belting Portfolio is the only solution that addresses the root causes of food conveyor challenges. Maintaining conveyance systems in food processing is challenging.
E-FLO™ Electroporation System
E-FLO is an Electroporation system that uses pulse electric fields (PEF) technology. The system sends PEF through the cell walls of potatoes and root vegetables and perforates the cell membranes with microscopic holes.
H-Flow Conveyor®
The H-Flow Conveyor® guarantees less product breakage and loss of coating and flavouring, compared to vibratory transfer systems.
intelli-flav® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
Mobile washer PD 500
Allround Mobile washer PD 500 washing machine is designed for cleaning produce. After the produce falls into the water it floats to a rotating drum. While the produce floats, stones and dirt sink to a waste belt at the back of the machine.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Buffer
Buffers allow to absorb the excess product flow and to dose it back to the line according to the
needs.
needs.
Polisher
Allround polishers are designed to polish produce. The TD (turning drum) machine consists of a rotating drum with counter-rotating brushes.
Potato Flake Line
Idaho Steel along with its strategic partners, Kiremko, Reyco, and others, is one of the few partnerships in the world that offer a complete potato flake line.
Radial grader
The Allround Radial grader is equipped with laterally placed grading rolls out of stainless steel. The distance between these rolls changes in steps over the different grading stages. Conveyor belts are placed under the machine, one for each grading size.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Eco Steam Peeler
The Eco Steam Peeler leads the food processing industry in the pursuit of the highest peeling performance and reduced waste to enable processors to achieve sustainability objectives in their food production.
Sponsored Content
You May Also Like
Peeling line Delta Roller Spreader
The Tummers Peeling Line Delta Roller Spreader has specially been developed for gentle transport to a wider product flow. This machine is commonly used to feed potatoes from the outfeed of a screw conveyor to a wide sorter, but is suitable for a wide variety of food products.
Flo-Filter® Stack
The action continues under the fryer hood as the slices move down inside the fryer. In most systems in Europe the oil is heated by an incinerator (such as the Flo-Therm™ heater).
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Box Unstacker
Allround box unstacker is designed to speed up the process of unstacking and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Hoppers
Allround hoppers are designed to feed machines or product lines or act as a buffer in a processing line. The hopper is designed to work with cubic boxes and big bags.
