auto-splice 3
The tna auto-splice 3 system is an innovative solution that automatically joins a new film to an expiring film roll with no interruption to packaging line.
STRATA Invicta®
The STRATA Invicta® sets the new standard in steam peeling systems, offering the highest yield at the shortest possible cycle times.
Storage hopper box tipper combinations
The storage hopper with box tipper is designed to act as a buffer with tipping possibility. A box with produce is placed into the tipper. The box tips and the products fall down into the storage hopper.
Storage Hoppers
The Allround Storage Hoppers are designed to act as a buffer in a processing line or between a processing line and a packing line. The Storage Hoppers are designed to be built in segments.
Box Fillers
Allround box fillers are designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the fall height is reduced as much as possible.
Shake grading line SG 60 series
Shake grading line SG 60 series for table and seed potatoes
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Peeling line Delta Roller Spreader
The Tummers Peeling Line Delta Roller Spreader has specially been developed for gentle transport to a wider product flow. This machine is commonly used to feed potatoes from the outfeed of a screw conveyor to a wide sorter, but is suitable for a wide variety of food products.
Flo-Filter® Stack
The action continues under the fryer hood as the slices move down inside the fryer. In most systems in Europe the oil is heated by an incinerator (such as the Flo-Therm™ heater).
Steam Peeling
Steam peeling is the most efficient method of removing skin from vegetables and fruit. Lines processing between 1,000 kg/hr–65,000 kg/hr can benefit from TOMRA’s produce steam peeling equipment, resulting in savings of raw material and energy.
intelli-flav® CLO 3
The tna intelli-flav® CLO 3 oil and flavour spray system enables the accurate application of oil and injected flavour – or just oil – requiring no mixing tanks and leaving minimal flavour residue.
Zephyr Horizontal Motion Conveyor
Zephyr™ provides gentle, high-capacity and low maintenance conveying for processors of frozen, fragile, seasoned, breaded or coated products.
InProcess Software
InProcess makes the most of your production by allowing you to monitor, adjust and gain valuable data from your ZEISS spectrometers. Icon based and intuitive, InProcess is also fully customizable.
Sponsored Content
You May Also Like
FastBack® Left Right Center (LRC) Diverting Weigher Infeed Solution
The FastBack Left Right Center (LRC) is a compact double multihead weigher feed solution designed to provide a precise, consistent product stream to Ishida's patented back-to-back 218 twin weigher.
Hera Smart Flavour Solid system
Hera is a compact equipment for small and medium-scale production, designed to operate at the end of the production line. In this way, it is possible to apply different flavors simultaneously, giving more flexibility to the process.
Corda Invicta
With 30% less oil content, a 15% smaller factory footprint, a number of high-tech innovations and a lower Total Cost of Ownership than your current fryer, the Kiremko CORDA Invicta is leaps ahead in frying.
Vegetable washing machines
The Allround vegetable washing machines are designed to operate with a water basin. In this water basin, the water used in the commercial vegetable washer is recirculated to be used again.
ultra-clean® OC 3
Florigo ultra-clean® OC 3 conducts separation of stones from root vegetables, including potatoes through a cyclone effect.
wet washdown VFFS system arctic® 3
A vertical form, fill and seal (VFFS) food packaging solution, the tna arctic®3 is constructed from anti-corrosive stainless steel, handles wet washdown cleaning and meets strict sanitary requirements.
