Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Model CC Turntable
The Model CC turntable assists with head maintenance. Now available, the new Model CC turntable assists processors with a variety of tasks to save time and effort.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
conti-cut hydro cutting system
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
Flo-Cut® Sizer-Halver
Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
E TranSlicer® Cutters
The standard E TranSlicer Cutter (ETRS) accepts firm products up to 4" (101.6 mm) in diameter or leafy-type, compressible products up to 6" (152.4 mm). Interchangeable 20" (508 mm) diameter stainless steel cutting wheels reduce products with great precision and efficiency at high capacity.
Slicer Module
Flo-Mech complete module for slicing of product on stainless steel platforms with flumes, integrated equipment, steel work, decking, stairs, handrail kick strips.
TranSlicer® 2510 Cutter
The TranSlicer 2510 Cutter accepts compressible food products up to 8" (203 mm) in diameter, or firm products up to 6-3/4" (171 mm) in diameter — precutting may be necessary. Optional static hold-down assembly is available to maintain positive feeding assistance.
Sponsored Content
You May Also Like
Sprint 2® Dicers
Sprint 2® Potato Dicer - 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
Grader-Halver
A cost-effective solution designed to consistently grade potatoes according to size then halve any that are larger than the predetermined size.
Glide
FAM Glide 使用简单的机械切割方法将有缺陷的马铃薯条变成优质产品。
Tridis™ 180P
FAM Tridis™ 180P 专为新鲜和冷冻炸薯条加工机而设计。 其先进的切割技术可确保中高产能时的最高质量。 产品名称中的“P”表示专为马铃薯切割而设计的机器，可实现规则切割、最大长度以及最大限度地减少破损和羽化。
