Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Roller Inspection Table
Wyma's Roller Inspection Table conveys produce for manual and visual inspection. Rollers run on a heavy-duty chain around a bed with rubber strips on the top edge.
FMC Conveyor Program
Optimize your conveyors, minimize your foreign material risk. Conveyor-related foreign material risk is preventable with optimized preventive maintenance, conveyor setup, and sanitation programs.
Odyssey steam peeler
The Odyssey steam peeler incorporates TOMRA's control software, an enlarged steam peeling vessel, and a weigh hopper.
Receiving Hopper
The Allround Receiving Hopper is designed to feed or act as a buffer in loading and unloading lines or processing lines. The hopper is designed in such a way that it can be fed by tip trailers, box tippers, and big bags.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
intelli-flav® CLS 3
Deliver consistent seasoning application every time with the tna intelli-flav® CLS 3. This flavour spray system is specifically designed for raw powder and oil slurry combinations.
Screen sizer
The Allround Screen sizer is designed to grade according to the square or hexagonal size. the machine has a vibrating rotatling rubber bed with openings. is the product smaller than the opening, it falls on a belt.
Air dryer
The Allround Air dryer is designed to use a high-powered fan to remove water from the product. With the web belt, the water goes through the web and can be collected in a gutter or bin.
Steam Peeling
Steam peeling is the most efficient method of removing skin from vegetables and fruit. Lines processing between 1,000 kg/hr–65,000 kg/hr can benefit from TOMRA’s produce steam peeling equipment, resulting in savings of raw material and energy.
intelli-spin® 700 series
The Arcall intelli-spin® 700 series uses advanced spinning disc technology to provide accurate and consistent liquid and slurry application.
Washing line Destoner/Washer unit
Tummers Washing line Destoner/Washer unit is a stainless steel machine combination for destoning and washing potatoes and tubers that was developed for 24/7 industrial use. Optionally the machine can be set up to separate floating parts (foliage and stalks) from your product.
Sponsored Content
You May Also Like
Buffer
Permiten absorber el exceso de flujo de producto y dosificarlo de vuelta a la línea según las necesidades. De esta forma, se consigue mantener la homogeneidad en la línea y minimizar el número de paradas y arranques. Favorece a la autonomía de las líneas productivas.
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
Drum Dryer
Tummers is world market leader in potato flake lines. In a flakes line, the Drum Dryer dries the potato mash. A thin, perfectly distributed layer of mash is deposited onto the heated cylinder which evaporates excess moisture and creates a sheet of dried potato.
THS/MS21 Metal Detector
Product demonstrations of the CEIA THS/MS21 multi-spectrum metal detector are now available from Heat and Control.
Mini-Wet Hopper
La Mini Tolva de Remojo de Wyma proporciona un almacenamiento de carga en la mitad de la línea y un flujo continuo de hortalizas hacia el resto de su línea.
Eco Steam Peeler
The Eco Steam Peeler leads the food processing industry in the pursuit of the highest peeling performance and reduced waste to enable processors to achieve sustainability objectives in their food production.
