thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Primary Oil Filter
The Primary Oil Filter filters the oil of an entire frying system, making sure the oil is clean and crumb-free. With the very narrow pass, the POF provides a better result than most other filters installed in this part of a processing line.
Comitrol® Processor Model 2100
This machine is used for reducing into flakes or granulation for further processing.
Flo-Cool® ROCS
Flo-Cool® ROCS The latest Flo-Cool® system pumps oil through a HX system–to rapidly cool frying oil for storage in a day/over nigh tank–resulting in faster clean-down/change overtimes.
TOMRA 3A
Boasting the highest capacity on the market, the TOMRA 3A is the most robust, reliable and cost-effective optical sorter available for growers.
Drum Dryer
Tummers is world market leader in potato flake lines. In a flakes line, the Drum Dryer dries the potato mash. A thin, perfectly distributed layer of mash is deposited onto the heated cylinder which evaporates excess moisture and creates a sheet of dried potato.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Elea PEFPilot Dual trial system
Elea offers a trial batch system capable of treating solids and liquids for scientific and pilot scale applications with up to 10 L treatment volume.
Potato washing, brushing and grading line
Potato Processing line with a washing area, brushing area, and grading area.
Multi Zone French Fry Fryer
The Rosenqvists Multi-Zone frying system uses a minimum of oil resulting in high-quality french fry with a longer shelf life. They combine the latest technologies using computer simulation programs and build efficient and reliable process equipment.
quik-coat® MD 5
tna quik-coat® MD 5 is the ultimate mandrel dispensing unit that applies a variety of free flowing ingredients consistently onto the top of products passing underneath. The tna quik-coat® MD 5 is custom configured for width and ingredients.
Box Unstacker
Allround box unstacker is designed to speed up the process of unstacking and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.
Inspection Module
Flo-Mech Inspection Module is a product on stainless steel platforms with optional waste conveyors or flumes, integrated equipment, steelwork, decking, stairs, handrail & kick strips.
Sponsored Content
You May Also Like
wet washdown VFFS system arctic® 3
A vertical form, fill and seal (VFFS) food packaging solution, the tna arctic®3 is constructed from anti-corrosive stainless steel, handles wet washdown cleaning and meets strict sanitary requirements.
Fans
Fans are an integral part of the storage system, and therefore it is very important the proper type of fans are chosen for the right application. Furthermore, fans should be reliable and able to work under difficult
Elevator
Flo-Mech feed elevator is manufactured from RHS stainless steel. Blue modular flighted belt with an integrated C.I.P system to clean belt and sprockets.
Steam Peeler
The Tummers Steam Peeler (TSP) is specially designed to offer an excellent peeling result with higher batch loads. At a low steam consumption, this machine offers a higher capacity than any other steam peeler available.
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
Intake & Storage Equipment
Flo-Mech offers a range of intake and storage systems from smaller capacities all the way up to large systems with multiple infeed and storage bins. They can tailor solutions to your needs.
