Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
conti-cut hydro cutting system
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
Flo-Cut® Sizer-Halver
Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
TranSlicer® 2510 Cutter
The TranSlicer 2510 Cutter accepts compressible food products up to 8" (203 mm) in diameter, or firm products up to 6-3/4" (171 mm) in diameter — precutting may be necessary. Optional static hold-down assembly is available to maintain positive feeding assistance.
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Flo-Cut® Model 360 Watergun Cutting Head
The Flo-Cut® Model 360 cutting head is designed for use in large volume watergun systems, or with the Urschel Model VSC Cutter. This unit can be integrated into watergun systems and offers fast, easy cutting head replacement for changing knives or sizes of cuts.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Slicer Module
Flo-Mech complete module for slicing of product on stainless steel platforms with flumes, integrated equipment, steel work, decking, stairs, handrail kick strips.
Grader-Halver
A cost-effective solution designed to consistently grade potatoes according to size then halve any that are larger than the predetermined size.
Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
Fastlane
Heat and Control Fastlane infeed conveyors offer Easy, safe and cost-effective delivery of a singulated stream of potatoes to multiple slicers.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Sponsored Content
You May Also Like
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Sprint 2® Dicers
Sprint 2® Potato Dicer - 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
Tridis™ 240P
FAM Tridis™ 240P es una cortadora de papas fritas confiable que ofrece productos de la más alta calidad mientras funciona con las capacidades más altas.
Volantis™
FAM Volantis™ está diseñado para cortar transversalmente con precisión una amplia variedad de productos de forma larga y oblonga. Esta cortadora con correa trapezoidal garantiza cortes de alta calidad en volúmenes medios y altos.
