roflo® HM 3
The tna roflo® HM 3 is a high-performance food conveyor system that handles products gently, yet efficiently, using a slow, forward horizontal motion, followed by a fast return horizontal motion.
Batch Fryer
Automatically produce consistently uniform kettle style potato chips with these Heat and Control Batch Fryers
Hydro-Cooler for loose produce
Wyma Hydro-Coolers quickly reduce the core temperature of fresh produce, extending shelf life while preserving flavor and appearance. Water is sprayed over a heat exchanger which is cooled to several degrees below freezing by refrigerant.
Potato Washing Line for Processing
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled. This is line includes the washing machine U 500.
Comitrol® Processor Model 2100
This machine is used for reducing into flakes or granulation for further processing.
Drying Tunnel
Wyma's Drying Tunnel removes excess surface moisture from produce prior to packaging to reduce the risk of bacterial growth and disease initiation, maximizing shelf life.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Field Potato Sorter (FPS)
The FPS, Field Potato sorter, is a sensor based food sorter for unwashed potatoes, removing soil clods, stones and foreign material. It is a high volume, high capacity, robust machine for growers and packers that is built to last.
Small line to pack potatoes
In this example of a small line to pack potatoes (5 ton per hour), produce can be received onto an Elevator where they are fed into a Horizontal Debris Remover, to remove loose dirt, vine, and other debris.
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Accumulation Trays
GoSync Vibradores optimiza las regulaciones de flujo del producto y homogeneizamos el caudal, utilizando
tolvas de acumulación según sea necesario.
tolvas de acumulación según sea necesario.
Pulsemaster Compact PEF system
Pulsemaster Compact PEF system is a robust, all-in-one unit with a small footprint, which is designed to suit small and mid-scale production lines. The Compact PEF system is easy to install in a production line, quick to start up and has low energy and water requirements. This Compact PEF system can process up to an impressive 10 tons per hour at PEF.
Wet hopper
The Allround Wet hopper, previously called Jacuzzi, is used as a pre-cleaning device. The product falls in the water, where the sticky soil makes it heavier.
Sponsored Content
You May Also Like
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
STRATA Invicta®
The STRATA Invicta® sets the new standard in steam peeling systems, offering the highest yield at the shortest possible cycle times.
Barrel Washer
Wyma's Barrel Washer is a cost-effective machine that effectively and gently washes fresh produce while removing soil and small stones. Produce can be partially or fully submerged during washing. As the perforated barrel rotates, vegetables rub against each other and the barrel for a gentle clean.
Fans
Fans are an integral part of the storage system, and therefore it is very important the proper type of fans are chosen for the right application. Furthermore, fans should be reliable and able to work under difficult
Clean Wet Hopper
La tolva limpia y húmeda de Wyma recibe y almacena los productos en agua antes del envasado, lo que elimina la necesidad de cajas / contenedores. Los canales o transportadores transportan suavemente los productos al búnker.
Flo-Filter® Oil
Flo-Mech Flo-Filter® Oil: Continuous Frying Oil Filtration (& Management)
