Uitgebreide zoek mogelijkheden
Alleen van het type
Taal

Glide

Less Waste, Higher Output for Fries

The process of optical sorting fries involves waste products. The goal is to keep this percentage as low as possible. OptiServe has developed a shrewd cutting system which will increase output. And reduce waste to a bare minimum. Discover what the Glide has to offer.

Advantages of the Glide in a Nut Shell

The Glide has a rotating drum which positions the defect fries lengthwise into different slits. Then, the cutting machine transports these fries to the cutting section. The capacity that the Glide can take on is enormous.

Besides this, it does not use any water at all. This means you will save considerably on water consumption. The Glide is equipped with an adjustable cut of 10 to 25 millimeters. In addition, you can opt for an integrated sorting vibro with interchangeable sorting tray.
 
(Click picture to watch video)

See the Glide in action

Curious as to how quickly the Glide pays off? Just fill in the Calculation Chart on www.optiserve.nl

Machine Dimensions & Weight

Dimensions basic machine (LxWxH): 900 x 1 177,00 x 977 mm | 2ft 11.433" x 3ft 10.339" x 3ft 2.465"

Weight basic machine: 120 kg | 265 lbs

Motor

Voltage: 400 V

Cut Shapes & Sizes

Cut shapes: Straight cut pieces

Cut sizes: Adjustable

Capacity: Up to 800 kg | 1,764 lbs per hour

Kiremko
Key Technology
Tummers Food Processing Solutions
TOMRA Food
Heat and Control
FAM
Southern Fabrication Works
PIP Innovations
Urschel Laboratories, Inc.
Herbert B.V.
Tek-Dry Systems Ltd.
Buhler Aeroglide
Elea GmbH
Kuipers Food Processing Machinery BV
Idaho Steel Products
Insort GmbH
Dewulf
Tolsma-Grisnich Group
Dutch Tec Source BV (DTS)
Vanmark Equipment LLC
Allround Group
Flo-Mech Ltd
FPS Food Process Solutions
TNA Australia Pty Ltd
AgroScout
Wyma Engineering
NDC Technologies
Potatoes New Brunswick
Food Physics
Help