intelli-weigh® omega series
tna intelli-weigh® omega series of multi-head weighers was designed to provide a simple, yet efficient weighing process while running wet or dry applications.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
vac-pro® 3
Florigo vac-pro® 3 is a continuous vacuum frying system that gives you options to produce a variety of fried products, including root vegetables and fruits, with relatively low fat content.
Brushing Machines
The Allround brushing machine is designed to clean vegetables and potatoes using brushes that have a wave shape. The vegetables are transported through mass. Underneath the brushes, a box or transport belt can be placed to collect the dust.
accura-dry® BD 3
Ferguson accura-dry® BD 3 is a drying solution, removing moisture from French fries before frying.
Filter System
The Allround Filter system is designed to take out loose skin and dirt. Filtration is the separation of solids from the product by means of a filter belt, which retains the solids and allows the liquid to pass through.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
ultra-peel® SKC 3
Florigo ultra-peel® SKC 3 is an abrasive peeler that operates in batches, weighing your product, to ensure optimized peeling results from small, medium and large potatoes for the production of potato chips.
Slice Washer System
Rosenqvists Slice Washer System, a patented three-step washing system for optimal water use. When the potatoes are sliced, free surface starch is released and needs to be washed off.
Flo-Therm® G4 SX Oil Heater
Flo-Mech Flo-Therm® G4 SX Oil Heater is a Direct Oil Heating Systems with Pollution Control
Industrial Potato washing line 500 series
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
Eco Steam Peeler
The Eco Steam Peeler leads the food processing industry in the pursuit of the highest peeling performance and reduced waste to enable processors to achieve sustainability objectives in their food production.
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
Sponsored Content
You May Also Like
Dehumidifier
NSSPL’s dehumidifiers are designed with the latest technologies with world-class engineering aimed at catering to Cold Storage, Processing Units, Pharmaceuticals, Leather and Defence, etc.
Diversa Cut 2110 A Dicers
The DiversaCut 2110A® Dicer offers a turnkey approach to processors. Available in 3 different models: DiversaCut 2110A Standard Dicer, NEW DiversaCut 2110A with Conveyor Discharge, and DiversaCut 2110A (LPI) Large Product Input.
robag® 3e FX series
tna robag® FX series is a vertical, form, fill and seal (VFFS) packaging solution with speeds up to 250 bags per minute using rotary triple, double, single or flat jaw configurations to package a variety of bag types.
Hydro Cooler
The Allround hydro cooler is designed to cool down the produce, especially carrots, before transportation. Hydro cooling dramatically increases the shelf-life of the vegetables.
Drop Limit Box Tipper
The Drop limit box tipper is a box tipper where the drop is limited, which leads to less damage to the product. The tilting of the box is done in three steps: The cubic box is put into the machine, after which the crate is clamped against a cover plate.
Potato Flake Line
Idaho Steel along with its strategic partners, Kiremko, Reyco, and others, is one of the few partnerships in the world that offer a complete potato flake line.
