Drop Limit Box Tipper
The Drop limit box tipper is a box tipper where the drop is limited, which leads to less damage to the product. The tilting of the box is done in three steps: The cubic box is put into the machine, after which the crate is clamped against a cover plate.
Odyssey steam peeler
The Odyssey steam peeler incorporates TOMRA's control software, an enlarged steam peeling vessel, and a weigh hopper.
hydro-wash® SW 3
Florigo hydro-wash® SW 3 is a slice washing system that removes starch and collects full size potato slices in a single layer for even frying.
Primary Oil Filter
The Primary Oil Filter filters the oil of an entire frying system, making sure the oil is clean and crumb-free. With the very narrow pass, the POF provides a better result than most other filters installed in this part of a processing line.
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
Potato Washing Line for Processing
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled. This is line includes the washing machine U 500.
Dry Peel Remover ZZ/ZicZac Brusher
Tummers Dry Peel Remover ZZ/ZicZac Brusher innovative stainless steel peel remover conveys potatoes and tubers after they have been steam-peeled, vertically between roller brushes in a zigzag arrangement to remove their peel and brush them.
Shake grading line SG80 series
Shake Grading line sg80 series hand feed inspection on the roller inspection table
ener-freeze® FFV 3
Ferguson ener-freeze® FFV 3 is a cooling and freezing solution with innovative air flow distribution technology to evenly freeze various potato products and shapes.
E TranSlicer® Cutters
The standard E TranSlicer Cutter (ETRS) accepts firm products up to 4" (101.6 mm) in diameter or leafy-type, compressible products up to 6" (152.4 mm). Interchangeable 20" (508 mm) diameter stainless steel cutting wheels reduce products with great precision and efficiency at high capacity.
Filter System
The Allround Filter system is designed to take out loose skin and dirt. Filtration is the separation of solids from the product by means of a filter belt, which retains the solids and allows the liquid to pass through.
ultra-peel® ODC 3
The perfect pair for its steam peeling counterpart, the tna ultra-peel ODC 3 is a dry de-skinning system with a difference.
You May Also Like
Peeling line Delta Roller Spreader
The Tummers Peeling Line Delta Roller Spreader has specially been developed for gentle transport to a wider product flow. This machine is commonly used to feed potatoes from the outfeed of a screw conveyor to a wide sorter, but is suitable for a wide variety of food products.
Flo-Grade® Scroll Grader
The Flo-Grade™ has been developed to be installed with our Flo-Cut™ sizer halver unit or on its own as a stand-alone potato or tuber grader. It has a tapered screw design for gentle grading and transfer of potatoes.
Polisher
Allround polishers are designed to polish produce. The TD (turning drum) machine consists of a rotating drum with counter-rotating brushes.
Washing line Destoner/Washer unit
Tummers Washing line Destoner/Washer unit is a stainless steel machine combination for destoning and washing potatoes and tubers that was developed for 24/7 industrial use. Optionally the machine can be set up to separate floating parts (foliage and stalks) from your product.
wet washdown VFFS system arctic® 3
A vertical form, fill and seal (VFFS) food packaging solution, the tna arctic®3 is constructed from anti-corrosive stainless steel, handles wet washdown cleaning and meets strict sanitary requirements.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
