Flo-Therm® G4 SX Oil Heater
Flo-Mech Flo-Therm® G4 SX Oil Heater is a Direct Oil Heating Systems with Pollution Control
immerso-cook® NUT 16
The FOODesign immerso-cook® NUT 16 oil nut roasting system is a continuous roasting solution for handling almonds, cashews, pepitas seeds, sunflower kernels, peanuts, and other nuts- and seeds-based products.
Multi Turbulent Blancher
Rosenqvists counter flow Multi Turbulent Blancher is used in the potato chip process to reduce the sugar content of the potato strips. The frying process reveals the amount of sugar by darkening the color.
H-Flow Conveyor®
The H-Flow Conveyor® guarantees less product breakage and loss of coating and flavouring, compared to vibratory transfer systems.
Storage hopper box tipper combinations
The storage hopper with box tipper is designed to act as a buffer with tipping possibility. A box with produce is placed into the tipper. The box tips and the products fall down into the storage hopper.
intelli-flav® CLO 3
The tna intelli-flav® CLO 3 oil and flavour spray system enables the accurate application of oil and injected flavour – or just oil – requiring no mixing tanks and leaving minimal flavour residue.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Screen Sizer
Wyma's Screen Sizer is a modular alternative to the Lift Roller Sizer that effectively sizes round produce in a continuous process. The Screen Sizer has a rotating screen with holes at a set size that separates produce into two sizes.
intelli-spin® 700 series
The Arcall intelli-spin® 700 series uses advanced spinning disc technology to provide accurate and consistent liquid and slurry application.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Creep Feed Hopper
Wyma's Creep Feed Hopper receives, stores, and conveys dirty produce that has a high level of dirt and clods. Wyma's Creep Feed Hopper is a dry hopper. It receives wet or dry produce with a high level of dirt and clods, allows for fast unloading and changeover time without starving your line of produce, and provides produce buffering.
Autotrax
A patented system for an optimum drying process that turns mash into potato flakes. The Tummers Autotrax makes sure that excess mash on the application rollers of the dryer is scraped off efficiently.
E²E-Condenser
Steam peeling is the most efficient way to peel potatoes, but the emission causes a loss of energy. The E²E-Condenser saves energy by condensing the emission and using the water for other purposes that take place further in the process.
Sponsored Content
You May Also Like
Corda Invicta
With 30% less oil content, a 15% smaller factory footprint, a number of high-tech innovations and a lower Total Cost of Ownership than your current fryer, the Kiremko CORDA Invicta is leaps ahead in frying.
Ishida ACP-700 Automated Snack Food Case Packer
The ACP-700 Case Packer can pack small and large pillow style bags, standup major, standup minor, side pack, as well as multiple pack patterns within the case.
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Industrial Potato washing line 600 series
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
Dry Peel Remover ZZ/ZicZac Brusher
Tummers Dry Peel Remover ZZ/ZicZac Brusher innovative stainless steel peel remover conveys potatoes and tubers after they have been steam-peeled, vertically between roller brushes in a zigzag arrangement to remove their peel and brush them.
Affinity® CD-L Dicer
The new Affinity® CD-L Dicer produces uniform dices in the small to intermediate size range. The CD-L combines the utility of Urschel Models CD-A and L-A, plus working design elements from the Affinity Integra® Dicer.
