Sensors
Optimal storage conditions can only be achieved with the help of accurate sensors. Allround produces its temperature sensors in their own factory where they are produced under optimal conditions
Receiving Hopper
The Allround Receiving Hopper is designed to feed or act as a buffer in loading and unloading lines or processing lines. The hopper is designed in such a way that it can be fed by tip trailers, box tippers, and big bags.
Diversa Cut 2110 A Dicers
The DiversaCut 2110A® Dicer offers a turnkey approach to processors. Available in 3 different models: DiversaCut 2110A Standard Dicer, NEW DiversaCut 2110A with Conveyor Discharge, and DiversaCut 2110A (LPI) Large Product Input.
immerso-cook® NUT 16
The FOODesign immerso-cook® NUT 16 oil nut roasting system is a continuous roasting solution for handling almonds, cashews, pepitas seeds, sunflower kernels, peanuts, and other nuts- and seeds-based products.
Nex-Gem Rotary Former
The Nex-Gem Rotary Former is the ideal workhorse for your production of potato patties, using state of the art controls, product change out, and automated Wash-in-Place.
Floating Debris Remover
Wyma's Floating Debris Remover is designed to sit above the tank of a Wet Hopper and prevent floating debris from clogging downstream equipment.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Model VSC Segment Cutter
The Model VSC produces a wide range of segments, slabs, or rectangular strips. Several different cutting set-ups are available including standard heads, Flo-Cut® Model 360 heads, and Velocicut® heads. Consult your local Urschel sales representative for the cutting head best-suited for our application.
Gooseneck Box Filler
Wyma's Gooseneck Bin Filler gently fills bins with produce. The gooseneck outfeed means the distance between the end of the elevator and the bottom of the bin is minimal to avoid produce damage.
Model CC Turntable
The Model CC turntable assists with head maintenance. Now available, the new Model CC turntable assists processors with a variety of tasks to save time and effort.
intelli-flav® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
11 mm Skin on French Fries
With the skin left on for extra flavour and rustic appeal, these frites are made from uber long, high quality potatoes. Potato skin is not only a rich source of fibre
quik-coat® MD 5
tna quik-coat® MD 5 is the ultimate mandrel dispensing unit that applies a variety of free flowing ingredients consistently onto the top of products passing underneath. The tna quik-coat® MD 5 is custom configured for width and ingredients.
Odyssey steam peeler
The Odyssey steam peeler incorporates TOMRA's control software, an enlarged steam peeling vessel, and a weigh hopper.
Multi Zone French Fry Fryer
The Rosenqvists Multi-Zone frying system uses a minimum of oil resulting in high-quality french fry with a longer shelf life. They combine the latest technologies using computer simulation programs and build efficient and reliable process equipment.
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
robag® 3e TX series
tna robag® TX series is a range of vertical, form, fill and seal (VFFS) packaging solutions that handle a variety of bags using rotary double, single or flat jaw configurations.
Mobile washer PD 500
Allround Mobile washer PD 500 washing machine is designed for cleaning produce. After the produce falls into the water it floats to a rotating drum. While the produce floats, stones and dirt sink to a waste belt at the back of the machine.