Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
ultra-peel® ODC 3
The perfect pair for its steam peeling counterpart, the tna ultra-peel ODC 3 is a dry de-skinning system with a difference.
Receiving Hopper
The Allround Receiving Hopper is designed to feed or act as a buffer in loading and unloading lines or processing lines. The hopper is designed in such a way that it can be fed by tip trailers, box tippers, and big bags.
Elevator
Flo-Mech feed elevator is manufactured from RHS stainless steel. Blue modular flighted belt with an integrated C.I.P system to clean belt and sprockets.
Intake & Storage Equipment
Flo-Mech offers a range of intake and storage systems from smaller capacities all the way up to large systems with multiple infeed and storage bins. They can tailor solutions to your needs.
InProcess Software
InProcess makes the most of your production by allowing you to monitor, adjust and gain valuable data from your ZEISS spectrometers. Icon based and intuitive, InProcess is also fully customizable.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Hermes Flavour Liquids and Solids system
Hermes is a piece of equipment designed for large-scale production due to its robustness and size allows to apply powdered liquids, flavors and salt simultaneously.
CCW-RV Open Frame Weigher
Ishida’s latest IP69K waterproof weigher is now fully open for cleaning.
Buffer
Buffers allow to absorb the excess product flow and to dose it back to the line according to the
needs.
needs.
KW Washing and Destoning Combo
The KW Washer destoner is a thoughtful combination of a drum washer, destoner and tools to remove floating debris. The unit has several options to manage water level and flow, allowing customization to your local conditions and product(s)
Peeling line
Tummers peeling lines for the peeling and after-washing of potatoes and tubers are developed with the purpose of high-quality end product and minimal skin loss.
vac-pro® 3
Florigo vac-pro® 3 is a continuous vacuum frying system that gives you options to produce a variety of fried products, including root vegetables and fruits, with relatively low fat content.
Sponsored Content
You May Also Like
FastBack® Blending System
FastBack Blending Systems offer manufacturers the most economical, accurate, and consistent means of delivering product blends to multiple scales in a variety of environments.
Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.
hydro-wash® SW 3
Florigo hydro-wash® SW 3 is a slice washing system that removes starch and collects full size potato slices in a single layer for even frying.
Drop Limit Box Tipper
The Drop limit box tipper is a box tipper where the drop is limited, which leads to less damage to the product. The tilting of the box is done in three steps: The cubic box is put into the machine, after which the crate is clamped against a cover plate.
accura-dry® BD 3
Ferguson accura-dry® BD 3 is a drying solution, removing moisture from French fries before frying.
quik-coat® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
