Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
Roller Inspection Table
Wyma's Roller Inspection Table conveys produce for manual and visual inspection. Rollers run on a heavy-duty chain around a bed with rubber strips on the top edge.
Allround Fixed Roller sets
The Allround Fixed roller sets are designed to take out loose skin and dirt. This raises the capacity of the line and reduces the amount of dirt in the other machines and is the most gentle and efficient way of pre-cleaning.
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Potato Flake Line
Idaho Steel along with its strategic partners, Kiremko, Reyco, and others, is one of the few partnerships in the world that offer a complete potato flake line.
Orbit Steam Peeler
The versatile Orbit Steam Peeler runs a wide range of vegetables at variable pressures with minimum steam to save resources and improve your throughput.
Combi-System
Our Combi-System combines a Tank Destoner, Barrel Washer and Floating Debris Remover. Produce and stones are fed into the Tank Destoner.
robag® 3e FX series
tna robag® FX series is a vertical, form, fill and seal (VFFS) packaging solution with speeds up to 250 bags per minute using rotary triple, double, single or flat jaw configurations to package a variety of bag types.
FastBack® Left Right Center (LRC) Diverting Weigher Infeed Solution
The FastBack Left Right Center (LRC) is a compact double multihead weigher feed solution designed to provide a precise, consistent product stream to Ishida's patented back-to-back 218 twin weigher.
Fry Line
Idaho Steel is active worldwide in designing, producing and installing complete processing lines, factory upgrades and individual machines for french fries.
Sponsored Content
You May Also Like
Flo-Wash® SBW
Flo-Mech Flo-Wash® submerged barrel washing system ensures a clean product, ready for further processing.
Box Tipping/Hopper Systems
Flo-Mech offers a range of box or crate tipping and unloading systems along with buffer hoppers to suit your requirements.
Elea PEFPilot Dual trial system
Elea offers a trial batch system capable of treating solids and liquids for scientific and pilot scale applications with up to 10 L treatment volume.
KW Washing and Destoning Combo
The KW Washer destoner is a thoughtful combination of a drum washer, destoner and tools to remove floating debris. The unit has several options to manage water level and flow, allowing customization to your local conditions and product(s)
Box Fillers
Allround box fillers are designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the fall height is reduced as much as possible.
Continuous sorter
Tummers Continuous sorter is an industrial stainless steel machine for custom sorting of potatoes and tubers. The machine is directly adjustable, which means that production can continue while adjusting the settings.
