Belt Dryer
The Rosenqvists Belt Dryer works on air with low temperature and high humidity that ensure even drying results of each strip. The Belt Dryer uses the counter-air-flow principle where the airflow covers the full width of the belts.
Frying Systems for Nuts
The Rosenqvists Nut frying systems are suitable for all types of nuts and seeds. The fryer is excellent for coated nuts. Depending on the final product, the frying system is equipped with a suitable type of belt
intelli-detect® 3
Protect your product from contamination with the tna intelli-detect® 3 – a highly accurate throat metal detector specially designed to detect contaminants of less than 0.5mm in diameter, in addition to any metals.
ultra-clean® WT 3
Florigo ultra-clean® WT 3 removes clay shells, sand and soil from potatoes and other root vegetables without damaging them.
Unitized Vacuum Fryer
Versatile vacuum frying made simple. Self-contained vacuum fryer saves space & controls acrylamide.
Solidus
Pulsemaster manufactures a range of PEF systems for research and development, tailored to suit specific research needs. This Pulsemaster Solidus PEF pilot-scale batch unit can treat solids and liquids for research and development purposes.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Box Tipping/Hopper Systems
Flo-Mech offers a range of box or crate tipping and unloading systems along with buffer hoppers to suit your requirements.
tna conti-pro® DAL 3
Florigo conti-pro® DAL 3 is a continuous dal frying system that features a product transport system that increases product quality while reducing product loss.
Polisher
Allround polishers are designed to polish produce. The TD (turning drum) machine consists of a rotating drum with counter-rotating brushes.
Potato Washing, Brushing & Grading line
Potato Processing line with washing, brushing, and grading. First, there is receiving and brushing area. Product pass from swan neck elevator and move from spiral roller set and brusher to reach the inspection and grading area.
Hermes Flavour Liquids and Solids system
Hermes is a piece of equipment designed for large-scale production due to its robustness and size allows to apply powdered liquids, flavors and salt simultaneously.
Model CC Slicer
Food processors rely on the Urschel Model CC (MCC) to produce precise, uniform slices, strips cuts, shreds, and granules at high production capabilities with excellent results.
Sponsored Content
You May Also Like
Fryer for Batter-coated French Fries
Over 16,000 kg/h of finished crispy batter-coated french fries can be produced for fast-food lovers using Heat and Control's latest batter applicator and multi-zone fryer system.
Washing lines
Tummers offers washers/destoners with a capacity ranging from 15 tonnes/hr to 180 tonnes/hr and continues to develop for more efficiency and better quality.
Quadra-Flow
QuadraFlow's many benefits range from results on French fries, wedges, and slices, to easy operation and user-friendliness.
Eco Steam Peeler
The Eco Steam Peeler leads the food processing industry in the pursuit of the highest peeling performance and reduced waste to enable processors to achieve sustainability objectives in their food production.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
