Aspire storage system
The aspire system for open boxes is also a direct ventilation system. The air in the room is conditioned and then sucked through the boxes. All kinds of standard open boxes can be used for this system.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
Primary Oil Filter
The Primary Oil Filter filters the oil of an entire frying system, making sure the oil is clean and crumb-free. With the very narrow pass, the POF provides a better result than most other filters installed in this part of a processing line.
Wet hopper
The Allround Wet hopper, previously called Jacuzzi, is used as a pre-cleaning device. The product falls in the water, where the sticky soil makes it heavier.
Potato Cleaning, Grading and Retail Packaging line
Potato cleaning, grading and retail packaging line
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
quik-coat® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
batch-pro® 12
FOODesign batch-pro® 12 batch fries a wide selection vegetable chips including potato, taro, banana and plantain.
Storage Hoppers
The Allround Storage Hoppers are designed to act as a buffer in a processing line or between a processing line and a packing line. The Storage Hoppers are designed to be built in segments.
Cold Storage Solution
NSSPL cold storages are designed with the latest technologies keeping local climatic conditions into consideration. NSSPL builds Temperature Controlled Cold Storage
ultra-peel® SKC 3
Florigo ultra-peel® SKC 3 is an abrasive peeler that operates in batches, weighing your product, to ensure optimized peeling results from small, medium and large potatoes for the production of potato chips.
Sponsored Content
You May Also Like
Small line to pack potatoes
In this example of a small line to pack potatoes (5 ton per hour), produce can be received onto an Elevator where they are fed into a Horizontal Debris Remover, to remove loose dirt, vine, and other debris.
Intake & Storage Equipment
Flo-Mech offers a range of intake and storage systems from smaller capacities all the way up to large systems with multiple infeed and storage bins. They can tailor solutions to your needs.
Spool Sizer
Wyma's Spool Sizer gently sizes round produce into two sizes. Our Spool Sizer has a series of rotating rollers fitted with spools set apart at a specified distance.
Tapered Roll Sizer
Size your potatoes using the compact and easy to clean SFW tapered roll sizer
Form Line
Idaho Steel is active worldwide in designing, producing and installing complete processing lines, factory upgrades and individual machines for formed potato specialties. Formed potato specialties have been around for decades.
Series 1750 Flush Grid Belt
The new Intralox® Series 1750 Flush Grid belt takes abrasion resistance to a new level. It is a superior solution for use in the harsh conditions wet (potato) receiving lines.
