Heat and Control - E-FLO™ Electroporation System
E-FLO™ Electroporation System
E-FLO is an Electroporation system that uses pulse electric fields (PEF) technology. The system sends PEF through the cell walls of potatoes and root vegetables and perforates the cell membranes with microscopic holes.
Heat and Control FastBack 4.0 Horizontal Motion Conveyor
FastBack 4.0 Horizontal Motion Conveyor
FastBack 4.0 is a circular to linear drive horizontal motion conveyor, a new solution in horizontal motion conveying. It is the culmination of more than 10 years development and multiple international patents.
Allround Potato Skin Separator SDK 100
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Wyma Creep Feed Hopper
Creep Feed Hopper
Wyma's Creep Feed Hopper receives, stores, and conveys dirty produce that has a high level of dirt and clods. Wyma's Creep Feed Hopper is a dry hopper. It receives wet or dry produce with a high level of dirt and clods, allows for fast unloading and changeover time without starving your line of produce, and provides produce buffering.
Wyma Vege-Polisher™ V4
Vege-Polisher™ V4
Our V4 Vege-Polisher™ has many features including automated machine operation and improved access for maintenance and cleaning. Our Vege-Polisher™ has a rotating drum made up of rows of nylon brushes. Produce enters via a large infeed chute.
Flo-Mech Station Inspection Table
Station Inspection Table
Flo-Mech's rollers or belt inspection tables are built to last with cutting tables and knives with many options available
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
 Allround Even-flow hopper EF 100-0.7
Even-flow hopper
The Allround Even-flow hopper is used to dose the flow of product in a line. Mostly the Even-flow hopper is used in front of a Weighing machine or an optical sorter.
Allround Sensors
Sensors
Optimal storage conditions can only be achieved with the help of accurate sensors. Allround produces its temperature sensors in their own factory where they are produced under optimal conditions
Flo-Mech Flo-Dry® Dryer
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Rosenqvists Patented Defatter
Defatter
Rosenqvists patented Defatter has been proven to add value to many fried snack products by reducing the fat content by as much as 35% over typical levels.
Wyma Rotary Screen Water Recycling System
Rotary Screen Water Recycling System
Wyma's Rotary Screen Water Recycling System removes vegetable matter, debris and dirt from Vege-Polisher™ wastewater so the water can be reused. Wastewater and debris are collected in the sloped catchment tray.
Wyma Octal-S Conveyors & Elevators
Octal-S Conveyors & Elevators
Wyma's Octal-S Conveyors & Elevators transport produce efficiently to different parts of your line. The belt runs on a low-maintenance slat bed for a smooth and even motion.
Sponsored Content

You May Also Like

Wyma Hydro-Cooler for loose produce
Hydro-Cooler for loose produce
Wyma Hydro-Coolers quickly reduce the core temperature of fresh produce, extending shelf life while preserving flavor and appearance. Water is sprayed over a heat exchanger which is cooled to several degrees below freezing by refrigerant.
Key Zephyr Horizontal Motion Conveyor
Zephyr Horizontal Motion Conveyor
Zephyr™ provides gentle, high-capacity and low maintenance conveying for processors of frozen, fragile, seasoned, breaded or coated products.
Wyma Mini-Wet Hopper
Mini-Wet Hopper
Wyma's Mini Wet Hopper (for buffer storage) is great when you need in-line buffer storage and produce soak at the clean end of your line. It can also be used for chemical applications.
Urschel - E TranSlicer® Cutters
E TranSlicer® Cutters
The standard E TranSlicer Cutter (ETRS) accepts firm products up to 4" (101.6 mm) in diameter or leafy-type, compressible products up to 6" (152.4 mm). Interchangeable 20" (508 mm) diameter stainless steel cutting wheels reduce products with great precision and efficiency at high capacity.
Idaho Steel Form Line.
Form Line
Idaho Steel is active worldwide in designing, producing and installing complete processing lines, factory upgrades and individual machines for formed potato specialties. Formed potato specialties have been around for decades.
Allround Humidifier
Humidifier
Agricultural products like potatoes and carrots need to be stored under quite humid conditions. Especially in dry climates it is necessary to add moisture to the air.

Filters

Refine By Company
Selected Entities
Filter by product group
FILTER alfabetisch