Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
Primary Oil Filter
The Primary Oil Filter filters the oil of an entire frying system, making sure the oil is clean and crumb-free. With the very narrow pass, the POF provides a better result than most other filters installed in this part of a processing line.
clear-cut® SWM 3
Florigo clear-cut® SWM 3 is an efficient water cutting system that is able to handle a variety of cutting styles for potatoes – all while eliminating product damage.
Horizontal Box Filler
Allround Horizontal Box Filler is designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the product damage is reduced as much as possible and to fill the box completely from sides as well.
Series 1750 Flush Grid Belt
The new Intralox® Series 1750 Flush Grid belt takes abrasion resistance to a new level. It is a superior solution for use in the harsh conditions wet (potato) receiving lines.
robag® 3e FX series
tna robag® FX series is a vertical, form, fill and seal (VFFS) packaging solution with speeds up to 250 bags per minute using rotary triple, double, single or flat jaw configurations to package a variety of bag types.
Odyssey steam peeler
The Odyssey steam peeler incorporates TOMRA's control software, an enlarged steam peeling vessel, and a weigh hopper.
Steam Peeler
The Tummers Steam Peeler (TSP) is specially designed to offer an excellent peeling result with higher batch loads. At a low steam consumption, this machine offers a higher capacity than any other steam peeler available.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
robag® 3ci TX series
A vertical form, fill and seal (VFFS) food packaging machine capable of packing up to 150 bpm*, the tna robag® TX 3ci is their original, trusted system.
Cutting blocks
Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.
Form Line
Idaho Steel is active worldwide in designing, producing and installing complete processing lines, factory upgrades and individual machines for formed potato specialties. Formed potato specialties have been around for decades.
You May Also Like
Washing line Roller Dryer
Tummers Washing Line Roller Dryer ensures that after washing and destoning the moisture still present is removed from the potatoes or tubers without affecting the product characteristics.
E²E SteamClosure
The introduction of the E2E SteamClosure means those days are over. In conjunction with partner Solutherm, Tummers is continuing to expand the Emission to Energy (E2E) concept through the addition of this ingenious extraction system.
conti-pro® PEL 3
Florigo conti-pro® PEL 3 is a pellet and specialty products frying system handling a wide range of pellet shapes and product shapes using a highly efficient frying process.
Vegetable washing machines
The Allround vegetable washing machines are designed to operate with a water basin. In this water basin, the water used in the commercial vegetable washer is recirculated to be used again.
Bulk Storage
Storage in bulk is an effective and economical way of storage. Effective because it is a direct ventilation system what means that 100% of the air distribution coming from the fan is forced to pass the product.
Industrial Potato washing line 600 series
This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
