quik-coat® MLS 3
The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.
Inspection unit in cabin
The Allround Cabin inspection is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
FMC Conveyor Program
Optimize your conveyors, minimize your foreign material risk. Conveyor-related foreign material risk is preventable with optimized preventive maintenance, conveyor setup, and sanitation programs.
Heat Exchanger
All kind of stored agricultural products are sensitive for too high CO2 levels. Too high CO2 levels can affect the quality of the product. For example during storage of industrial potatoes, high CO2 levels can affect the frying quality.
French Fry Lines
NSSPL’s French Fry Lines are designed with the latest technologies to produce efficient and reliable process lines. They offer reliability, high quality, and turnkey solutions for frozen french fry production lines.
VERYX Sorters
VERYX® transforms digital sorting with a modular platform of chute-fed and belt-fed sorters to meet your unique and specific needs.
Potato Scoop
Iscon Balaji's Potato Scoops are great for gourmet dining. Finely chiselled into scoops, this finger food is perfect for dunking. Crafted to retain hold time, Potato Scoops remain crisp so that connoisseurs can relish these fries with the choicest dips and sauces without any mess on the plate.
thermo-wash® HW 3
The tna thermo-washHW 3 is a potato hot washing system designed to overcome challenges associated with raw materials high in sugar, by lowering sugar content to below 0.2% ready for frying.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Flo-Therm® G4 PC Oil Heater
Flo-Mech Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
STRATA Invicta®
The STRATA Invicta® sets the new standard in steam peeling systems, offering the highest yield at the shortest possible cycle times.
Hydrocutter
SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.
You May Also Like
Peeling line Delta Roller Spreader
The Tummers Peeling Line Delta Roller Spreader has specially been developed for gentle transport to a wider product flow. This machine is commonly used to feed potatoes from the outfeed of a screw conveyor to a wide sorter, but is suitable for a wide variety of food products.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
Shake grading line SG120 series
SG 120 is designed for companies that are grading potatoes and onions up to 20-25 tons/hour. The line is especially suitable for seed potatoes.
Fresh produce pump
Tummers Food Processing Solutions has exclusive marketing rights to product pumps for processing potatoes, vegetables, and fruit. Their fresh produce pumps will pump your product without damaging it.
Drum Dryer
Tummers is world market leader in potato flake lines. In a flakes line, the Drum Dryer dries the potato mash. A thin, perfectly distributed layer of mash is deposited onto the heated cylinder which evaporates excess moisture and creates a sheet of dried potato.
