Corda Invicta
With 30% less oil content, a 15% smaller factory footprint, a number of high-tech innovations and a lower Total Cost of Ownership than your current fryer, the Kiremko CORDA Invicta is leaps ahead in frying.
intelli-flav® CLS 5
Featuring an innovative under-surface mixing design, the tna intelli-flav® CLS 5 is ideal for creating a homogenous slurry mix for use on extruded and other dry snacks.
Shake Grading line SG80 series
The Allround Shake grader is designed to grade potatoes according to their square size. The potatoes are fed to the top of the machine onto the top sieve. The sieves in the machine shake in sequential frequencies, which causes the potatoes to move along on the sieves.
InProcess Software
InProcess makes the most of your production by allowing you to monitor, adjust and gain valuable data from your ZEISS spectrometers. Icon based and intuitive, InProcess is also fully customizable.
intelli-detect® 3
Protect your product from contamination with the tna intelli-detect® 3 – a highly accurate throat metal detector specially designed to detect contaminants of less than 0.5mm in diameter, in addition to any metals.
Zephyr Horizontal Motion Conveyor
Zephyr™ provides gentle, high-capacity and low maintenance conveying for processors of frozen, fragile, seasoned, breaded or coated products.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
hydro-wash® WTP 3
Florigo hydro-wash® WTP 3 is a slice washing system that removes starch and collects only full size potato slices.
TOMRA 5A
The TOMRA 5A sorting machine brings more than 98% removal rate of foreign objects, quality inspection and peel quality control to the table.
Reverse box tipper
When an empty box is put in its place box will tip at an angle. While the box is filled he slowly tips back. This way of filling minimizes the product damage.
Inspection unit in cabin
The Allround Cabin inspection is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
French Fries Line
Tummers Food Processing Solutions has built up extensive knowledge of potatoes as a raw material and the best methods for processing them.
Flo-Dry Dryer
The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.
Flo-Flavour®
Flo-Flavour™ systems are designed to mix together powder flavourings and oil whilst keeping the mix at the correct temperature and the components in suspension before delivery to the flavour application drum via a nozzle lance.
Flo-Cut® Sizer-Halver
Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
Velocicut® Cutting Head
The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.
Multi Zone French Fry Fryer
The Rosenqvists Multi-Zone frying system uses a minimum of oil resulting in high-quality french fry with a longer shelf life. They combine the latest technologies using computer simulation programs and build efficient and reliable process equipment.
Screen Piece Remover
Wyma's Screen Piece Remover effectively removes broken pieces, small stones and other debris from produce flow in a continuous process. It has a rotating screen with holes at a set size.