Washing lines
Tummers offers washers/destoners with a capacity ranging from 15 tonnes/hr to 180 tonnes/hr and continues to develop for more efficiency and better quality.
PeelGuard®
The PeelGuard collects data on the peeled product such as size, defects and peel removed and can also optimize the settings of the steampeeler
FastBack® 260E G3
The new FastBack P2 400E horizontal motion conveyor is the sanitary solution for high-volume transfer and distribution.
Tapered Roll Sizer
Size your potatoes using the compact and easy to clean SFW tapered roll sizer
intelli-weigh® omega series
tna intelli-weigh® omega series of multi-head weighers was designed to provide a simple, yet efficient weighing process while running wet or dry applications.
hyper-detect® 5
Protect your brand’s reputation with the tna hyper-detect® 5. This high-performance food metal detector system is uniquely designed to sit as close as possible to the multi-head weigher, significantly increasing bagging speed without compromising food safety.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
hydro-wash® SW 3
Florigo hydro-wash® SW 3 is a slice washing system that removes starch and collects full size potato slices in a single layer for even frying.
KnifeGuard®
The KnifeGuard uniquely identifies each knife block and verifies that the correct combination of block and alignment tubes is used. Also keeps track of use and maintenance of each knifeblock.
robag® 3e
The new tna robag® 3e is the latest iteration of the industry-leading tna robag® packaging series. The new tna robag® 3e takes control sophistication to an unprecedented level with real-time communication software and smart diagnostics.
Steam Peeler
The Tummers Steam Peeler (TSP) is specially designed to offer an excellent peeling result with higher batch loads. At a low steam consumption, this machine offers a higher capacity than any other steam peeler available.
Accumulation Trays
Optimize product flow regulations and homogenize the flow rate, using accumulation hoppers as required.
Flo-Cut® Model 360 Watergun Cutting Head
The Flo-Cut® Model 360 cutting head is designed for use in large volume watergun systems, or with the Urschel Model VSC Cutter. This unit can be integrated into watergun systems and offers fast, easy cutting head replacement for changing knives or sizes of cuts.
Sponsored Content
You May Also Like
Defatter
Rosenqvists patented Defatter has been proven to add value to many fried snack products by reducing the fat content by as much as 35% over typical levels.
Flume Destoner
Wyma's Flume Destoner removes stones and clods from your produce flow to minimize damage to equipment and produce further down your processing line.
Elea PEFPilot Dual trial system
Elea offers a trial batch system capable of treating solids and liquids for scientific and pilot scale applications with up to 10 L treatment volume.
robag® FX 3ci
An industry-leading vertical form, fill and seal (VFFS) food packaging solution, tna’s robag® FX 3ci guarantees unrivalled speed and flexibility.
intelli-detect® 3
Protect your product from contamination with the tna intelli-detect® 3 – a highly accurate throat metal detector specially designed to detect contaminants of less than 0.5mm in diameter, in addition to any metals.
Corona® extreme
Corona® extreme from ZEISS is the most robust spectrometer on the market. It doesn’t matter if it’s extremely hot, cold, or there are high levels of shock, vibration, dust or debris, Corona® extreme provides full-scale spectrometer measurement
